Showing posts with label solar panels. Show all posts
Showing posts with label solar panels. Show all posts

Monday, 12 January 2015

Glass News



Another inch of snow possible; wind-chill -14: Today, about another inch of snow is expected along with a wind-chill factor as low as 14 degrees below zero, according to the National Weather Service's Grand Rapid station. The wind-chill represents how cold it feels outside. By day's end, the area could have a total of just under 5 inches of snow on the ground, primarily from Thursday's storm, the weather service reported. Despite the snow and single-digit temperatures James Whitaker, with Great Lakes Window Cleaning, cleans the windows at Farnum Building in downtown Lansing Friday, January 9, 2015. Whitaker said they use ethanol alcohol to keep the cleaning solution from freezing. He joked that he'll take cleaning windows in the heat of summer anyday and that he thinks about quitting every winter.

Pella (yep, the window company) enters the connected-home market (LAS VEGAS): You know the connected-home market is going mainstream when a company like Pella jumps in with both feet. The noted window- and door-manufacturer announced a whole lineup of wireless products at CES, including doors, windows, garage doors, and motorized shades with Z-Wave sensors built right into the products. This neatly solves one of the biggest aesthetic problems with the smart home: The ugly plastic boxes that bulge off the surface of your door and window frames like angry boils.
Now few of us have the budget to replace all our doors and windows just to get hidden sensors, so Pella will also offer add-on sensors that can be used with any brand of door or window. This enables a homeowner to upgrade their doors and windows one or a few at a time, but still get all the benefits of Pella’s system.
A Pella spokesperson told me an installer can also retrofit any Pella door or window manufactured since 2005 with the embedded sensors.The products will be marketed under the brand name Insynctive. In addition to the usual sensors that report if a door, window, or garage door is open or closed (a tilt sensor, in the case of a garage door), Pella also developed a deadbolt sensor that can inform you if the door is locked or unlocked. This information is relayed to a status indicator that can be stored in a wall holster or held in your hand.
Beyond sensors, Pella also introduced a new line of motorized interior window shades, and windows and French doors with motorized blinds between two panes of glass. The motors run on rechargeable batteries that are connected to miniature external solar panels. Here again, existing Pella doors and windows with built-in blinds can be retrofitted if they were manufactured in 2005 or later. Pella’s Insynctive products are controlled by a handheld remote, or they can be tied into other lighting and connected-home systems using a Z-Wave to ethernet hub. To that end, Pella announced partnerships with Wink and Nexia at the DIY level, and Crestron and Savant at the custom-installer level.

Solar chip monitors windows: A new kind of radio chip is intended to warn when windows are left open. This way, you can avoid having the heat go out the window on cold days. The sensor also detects break-in attempts early on. The key: This maintenance-free chip powers up with energy supplied by solar power.  
It happens all too often in the cold times of the year: You open the window in the morning for fresh air and forget to shut it again. A thermostat reports cold temperatures, and the heating is turned up full blast – right out the window. But open windows are a problem with more than just the heating or storms. A window tilted open, for example, is a direct invitation to intruders. It would be desirable to have an automated system that notices open windows and sends an alarm signal to the tenant. There are certainly home and building systems today that register the window status. As a rule, however, the sensors have to be attached by cable to the alarm center inside the home or building itself. In other cases, battery-operated radio sensors are used. But changing batteries in structures that have several windows can lead to a considerable maintenance expense. Researchers from the Fraunhofer Institute for Microelectronic Circuits and Systems IMS in Duisburg therefore developed a pragmatic alternative: a radio sensor chip about the size of a fingernail that is mounted directly in the window. The tiny sensor is coated with a solar cell and it supplies itself with power.
Sensors differentiate between ball and crowbar - At ten millimeters, the chip is as narrow as a pane of insulating glass is thick. It is installed on the aluminum profile between the glass that maintains the distance between the panes. Thanks to this window space, the solar cell obtains adequate light, even in the darkness of winter. Integrated in the chip are magnet and acceleration sensors that register if the window is open just a crack or all the way. The chip can send a signal via radio to the base station in the building if a window has remained open for too long. The applications of the radio chip are diverse. It can remind homeowners to ventilate regularly or warn if a window is still open when they leave the home. In addition, it offers reliable protection from intruders even for closed windows. Because the sensors can differentiate very precisely between various fluctuations - for example, a ball that slams against the pane, or an intruder’s crowbar that ratchets open the window frame. Within a tenth of a second, the system detects the disturbance and sounds the alarm if there is any doubt.

Chemical-Sensing Displays and Other Surprising Uses of Glass - An inside look at Corning’s labs suggests what’s next for the inventor of Gorilla Glass: Someday your smartphone might be able to help you in a new way when you’re traveling: by telling you whether the water is safe to drink. Although a water app isn’t close yet, researchers at Corning and elsewhere recently discovered that they could use Gorilla Glass, the toughened glass made by Corning that’s commonly used on smartphone screens, to make extremely sensitive chemical and biological sensors. It could detect, say, traces of sarin gas in the air or specific pathogens in water.
The sensors are just one project I learned about during a visit to Corning’s R&D labs in upstate New York. In the last few decades, Corning’s advances in glass-making have led to technologies such as fiber optics and flat-panel displays. Now, thanks to Gorilla Glass, it’s associated with the latest smartphones. But despite the remarkable success of that product, it is keen to catch the next high-tech boom. Corning spends about 8 percent of its sales on R&D—which will amount to about $800 million this year. It’s a hedge against the very real possibility that one of its businesses could go dark—as has happened in the past. Between 2000 and 2002, Corning lost more than half of its revenue when its fiber-optics business collapsed with much of the rest of the telecom market. Its stock plummeted from $113 to just over $1. This year, it got another scare when one of its largest customers, Apple, came close to replacing Gorilla Glass in iPhones with sapphire.
Displays, in one way or another, account for about half of Corning’s revenue, with roughly a third of that coming from Gorilla Glass. To expand this market and withstand challenges from other materials, Corning is trying to add capabilities to Gorilla Glass, such as the sensor application. And it’s looking for new markets for Gorilla Glass beyond displays.
The ability to turn your phone into a biological and chemical sensor is one of the earliest-stage projects in the lab. Researchers at Corning and Polytechnique Montreal discovered that they could make very high quality waveguides, which confine and direct light, in Gorilla Glass. The researchers were able to make these waveguides very near to the surface, which is essential for sensors. Doing so in ordinary glass would break it. Making the waveguide involves focusing a beam of intense laser light near the surface of the glass, then tracing it along the glass, which locally changes its optical properties.
To make a sensor, the researchers make a waveguide that splits into two identical pathways for light. Then the paths converge, and the light from both paths meet up. One path serves as the sensing path, and the other as a reference. Even a tiny change to the light in the sensing path—such as its intensity—can be detected by observing how the light from the two paths interacts when they meet, producing distinct patterns.
The researchers demonstrated a simple sensor that detects changes in temperature. Heating up the sensing path changes its shape, which changes the properties of the light passing through it. Because the waveguide is so close to the surface, part of the light actually extends out of the glass, and anything placed on the surface of the glass will interact with part of the light. This means that to make a chemical or biological sensor, you could prepare the surface of the glass so that a specific target will bind to it. For example, you might treat it with antibodies that latch onto E. coli. or other contaminants; detecting their presence would be as simple as putting a drop of water on the phone.
The waveguides are microscopically thin, and therefore invisible, so they wouldn’t obscure a display. And because they’re quite small, sensors for several different biological or chemical targets could be incorporated into a smartphone.
Corning researchers have also discovered that Gorilla Glass has useful acoustic properties. The way it vibrates is different than conventional glass—it damps sound waves. The simplest application is noise insulation—it blocks sound better than ordinary glass.
But the same acoustic properties could also turn displays into speakers. I saw such a prototype in one of Corning’s labs. A wire in the display attaches to a small actuator that vibrates the glass to produce sound waves. Because of the way the waves propagate through the glass, they can be more precisely controlled than with ordinary glass, allowing for higher quality sound reproduction.
In another lab, researchers showed off a seemingly ordinary window. Then, with a flip of a switch on a circuit board, it turned into a display—one showing an old Coke commercial—and I could only barely make out what was behind the image. When the ad was over, I could see through the display again. Corning was particularly secretive about how it managed to make this technology work.

Here are (clockwise from bottom) NTU professor Sun Xiaowei, research fellow Liu He, and Ph.D. student Zheng Ke with their self-tinting window.
Nanyang Technological University (NTU Singapore) scientists have developed a smart window which can darken or brighten without the need for an external power source. This unique self-tinting window requires zero electricity to operate and is also a rechargeable battery. The window's stored energy can be used for other purposes, such as to light up low-powered electronics like a light emitting diode (LED).
Currently, the window solutions in the market are either using permanent tinting which cannot brighten at night or are windows that can change its light transmission properties only with an external power source. The NTU smart window however can be turned into a cool blue tint in bright daylight, cutting light penetration by about half, and then reverts back to clear glass at night or as required. This breakthrough research led by NTU Professor Sun Xiaowei, was published recently in Nature Communications, a prestigious peer-reviewed scientific journal.
How it works - The trick to making the self-powered smart window is a new technology developed by Prof Sun's team from NTU's School of Electrical and Electronic Engineering. "Our new smart electrochromic window is bi-functional; it is also a transparent battery," Prof Sun explained. "It charges up and turns blue when there is oxygen present in the electrolyte - in other words, it breathes."
The NTU smart window contains liquid electrolyte placed in between two glass sheets coated with indium tin oxide (ITO), commonly used as transparent conductive coatings for television displays. One sheet is coated with an additional layer of a pigment known as Prussian Blue and the other one is attached to a thin strip of aluminium foil. The Prussian Blue gives the glass a blue tint when it is fully charged.
The two glass sheets are connected by typical electrical cables. When the electrical circuit between them is broken, a chemical reaction starts between Prussian Blue and the dissolved oxygen in the electrolyte, turning the glass blue. To turn off the blue tint, the electrical circuit is closed to discharge the battery, turning the Prussian Blue into a colourless Prussian White.
Such an innovative technology can adjust the amount of sunlight coming into buildings in the day, which promises significant savings on cooling and lighting costs. "Our technology is very attractive as a zero-sum consumption smart window. Buildings owners and even common households can reap energy savings right from the outset and over the long term. Developers who are looking at constructing environmentally-friendly green buildings will find our technology attractive for their building plans," said Prof Sun.
Prof Sun is an electrical engineering expert whose other innovations include various solar technologies, glass-free 3D technologies, next-generation lightings and displays. The NTU team is now enhancing their invention and is looking forward to collaborating with industry partners to commercialise their technology.

Smart window startup View is raising another $75M: A year after raising a $100 million financing round, smart window startup View (formerly called Soladigm) is raising another $75 million round, and has closed on about $29 million of the round, according to a filing with the SEC. View makes dynamic windows, also called “electrochromic windows,” which use low-voltage electrical current to reflect or absorb light, tinting or untinting the window on demand.
If it closes the round, View will have raised more than $375 million over its eight year lifetime from investors including private equity firm Madrone Capital Partners (associated with the Walton family, the heirs to the Walmart fortune), Khosla Ventures, GE, Corning, DBL Investors, and the Westly Group. Making glass, and the IT needed to tint the glass, is an expensive proposition, but View can lower its production costs as it scales up manufacturing.
View spent 2014 working on growing production at its factory in Mississippi, as well as sales, distribution and marketing. At the beginning of 2014, View was shipping glass that was 50 square feet in size, and the company had installed about 50 projects across North America including a 27,000 square foot project at a hospital in Toronto, and a 37,000 square foot project at a tech center in Louisiana.
View’s windows of course are more expensive to buy than regular windows or cheap shading options like blinds. But View’s customers (premium hotels, corporate offices, etc.) are buying them both to be early adopters of cool tech, but also to reduce energy use and energy costs associated with air conditioning and heating. The coloring effect of View’s window can cool or warm a room, and can cut 20 percent off the costs of heating and cooling, 20 percent off of lighting, and can reduce peak load (electricity at peak times of use) by 25 percent.
View’s window manufacturing process is similar to one that’s used in the semiconductor industry, but using large glass pieces. The windows are made by depositing a 1 micrometer thick layer of tungsten oxide onto a pane of glass, and then that layer is sandwiched by another pane of glass. The original core technology came out of Lawrence Berkeley National Laboratory. View also makes the controller system, and the software and apps that can control the window tint from an iPhone.

Solar panels on our cliffs! The Navitus wind farm decision is still blowing hot and cold but personally I feel that it should be a “non starter” in favour of less-obtrusive solar panels. With the local coastline predominantly south-facing, surely Navitus would be able to mount solar panels on the side of our cliffs from Hengistbury Head all along our World Heritage Jurassic Coast as far as Lulworth Cove. This would appease the turbine objectors and still generate loads of lovely loot, erm, electricity, without creating the monstrous offshore eyesore currently proposed. Whilst providing much needed jobs for local window cleaners, enterprising beach hut owners could rig up their TV and kettles and make hot showers available for surfers.


Smart windows will keep buildings cool by turning white: There’s a lot of focus at the moment on making the houses we live in and the buildings we work in more energy efficient, to the point where air conditioning isn’t necessary. There’s still a long way to go before that happens, but a newly-developed smart window should help cut energy bills if it makes it into production. You can insulate walls and the roof of a building easily, but windows are a problem area. We need them to allow light into a building, but you can’t insulate them with typical non-transparent insulation materials. There is an alternative, though, in the form of hydrogels.
Hydrogels are a mix of water and polymer that can be made to react smartly to a changing environment. Existing hydrogels don’t work that well for use in a window because they swell so much when subjected to heat. So, a new hydrogel has been created that is suspended as small beads in a liquid and then sandwiched between two sheets of glass. This new hydrogel reacts to changes in temperature. The window will be transparent below a certain temperature, but beyond that it turns white, and therefore bouncing the light and heat away from the building. In so doing, this passive system can help control the interior temperature of a building on very hot days without the need to turn on expensive AC units.
As the swelling of the hydrogel is controlled effectively, it is viable for use in new smart windows which need to work faultlessly for decades. These windows will surely carry a premium price, but the building owner will recoup the cost and then some in lower, or even non-existent AC power bills.

A rendering of the interior of the new Vikings stadium.
For Vikings stadium's bird-safe glass, 3M might have solution: The Minnesota Sports Facilities Authority is in talks with the Vikings, 3M Co. and the Audubon Society about testing possible "bird-safe window film solutions" for the team's new stadium in Minneapolis, chairwoman Michele Kelm-Helgen said Wednesday. Environmental advocates say the stadium's large walls of transparent glass will be deadly for migrating birds, which can't distinguish between actual objects and reflections. The advocates have been pushing for "fritted," or patterned, glass to deter bird collisions, and some even called for the ouster of Kelm-Helgen last month over the issue.
"We are continuing to ... explore the possibility of a study that would occur during bird migratory seasons in various locations in Minnesota," Kelm-Helgen said in a statement. "The proposed plan would be to include the stadium in the study once it is built." The authority has agreed to a lights-out policy to deter bird collisions but has rejected proposals to install fritted glass -- which was estimated to cost about $1 million -- because the glass would mar the transparent look it wants for the new facility. The new stadium will have about 190,000 square feet of glass.
Kelm-Helgen said the latest "initial conversations" regarding a solution "have been positive and productive." "We are hopeful that we will have more information to share in the near future," she said. Testing could begin in spring 2015 and continue in the fall.
Kelm-Helgen said state Sen. Scott Dibble, DFL-Minneapolis, asked the authority to meet with the Audubon Society about the potential new solution. Dibble said it's still early in the talks, but the 3M product could maintain the transparent, open feel that stadium officials want but still make the glass visible to birds. "It seems to be, if it works, the thing that would solve everyone's problem," he said.
Dibble said that if additional bird safety measures aren't forthcoming, he plans in the next legislative session to push to require the stadium authority to implement them.
Matthew Anderson, executive director of Audubon Minnesota, said it's unclear whether the new solution would be as safe for birds as fritted glass. The stadium sits in the Mississippi flyway, Anderson said, a "superhighway" for migrating birds. He said research has shown more than 980 million birds die each year in North America as a result of flying into buildings. Many details still must be worked out, Anderson said, but "we've got the right players having the right conversation." It's unclear what the 3M product is, how much it would cost, and whether the authority or the team would pay the bill. A call to 3M was not returned. A Vikings spokesman deferred comment to the authority. The glass is to be installed in early 2015. The $1 billion stadium is scheduled to open in 2016.


Who Wants a Supertall Skyline? The Emerging Aesthetic of the 1,000-Foot Tower - When you’re putting up a multi­billion-dollar tower that’s a quarter-mile high, there’s not much leeway to make it a work of art. On the other hand, when you’re putting up a multibillion-­dollar tower that’s a quarter-mile high, it had damn well better be a work of art. Dozens of supertall buildings are being built or planned, radically redrawing the skyline. If we avert our gaze, we’ll get a bundle of glass stakes fencing off the air above ­Manhattan. Skyscrapers can be better. The difficulty of making an elegant symbolic presence out of an immense vertical machine has been vexing architects for more than a century. And yet it must be done.
Too many high-gloss behemoths are so superficially designed that they betray at least part of their mandate. The coming flock glories in the upward thrust, but the earliest skyscraper designers groped toward a vertical style. They enlarged European precedents, creating piled-up palazzos encrusted with giant cornices, columns, and pediments. Sullivan’s generation divided the tower into three parts — evoking a column’s base, shaft, and capital; a tree’s roots, trunk, and branches; or a drama’s exposition, denouement, and conclusion. Sullivan saw in this the natural, and therefore sublime, expression of what a building does: high-ceilinged shops on the bottom, in the middle a warren of offices repeating as many times as necessary, topped by a windowless attic. “Form ever follows function,” he declared, a formulation slightly less terse and much less prescriptive than the modernist battle cry it inspired: Form follows function! The recent image of the two window cleaners dangling on a cockeyed plank at One World Trade dramatized the disjunction between an implacably geometric juggernaut and the messy frailty of individual lives. The architectural challenge of supertall buildings is to accommodate humans in structures of inhuman scale.
Because today’s economics permit a tiny number of largely absent owners to have a disproportionate impact on the skyline, these buildings invert the rationale that propelled skyscraper construction for more than a century. Instead of packing the largest number of people onto the smallest patch of earth, they fill up the skyline with vacant acres of glassed-in parquet. These are mostly generic products masquerading as luxury goods: stratospheric views, ceilings high enough to echo, and features like on-site pet spas. This bounty of comforts is usually wrapped in floor-to-ceiling glass, which facilitates the imperial gaze — or pretends to. Actually, the glass wall maligns traditional windows, which provide both openings and shelter. You can’t appreciate a vista with your shins, or see much through the glass above your head. The layouts of these crystalline crows’ nests afford nowhere to retreat from contact with the sky. They offer the thrill of simulated exposure. No wonder the owners maintain a selection of cozier homes.
It’s not enough just to gawp at these towers’ bravado or grumble at the arrogance of the hyperrich gobbling up the sky. Like it or not, the elongated condo is an ever more assertive category of New York architecture, and it too can function as a form of public art. The combination of slenderness and height means that skyscrapers can sprout from modest lots, minimizing their impact on the street and narrowing the shadows they cast. The fact that they contain the caviar of real estate means that they can afford the luxury of being good. We have to live with the follies of the outlandishly wealthy; we can at least insist that they pamper themselves in a way that also enriches the city.

Monday, 8 December 2014

Window Cleaners Float Their Boat

Why window cleaners may have to float in the future to clean solar panels.
Clean Solar Solutions have completed the solar panel cleaning at the UK's very first floating solar farm in Reading, Berkshire, UK. It was installed by Floating Solar UK Ltd.  Here, shown in the video, window cleaners are cleaning 800 floating solar panels and the company also fit bird deterrents on the UK first ever floating solar array. The video shows how they did it. It is recommended to go to the youtube link to see the video.



BENEFITS OF FLOATING SOLAR SYSTEMS - WHY FLOATING?

1. Conserve valuable land and turn unused and non-revenue generating bodies of water into profitable solar power plants.
2. Floating solar panels protect ecologically-sensitive areas and conserve precious land for farming, mining, tourism and other land-intensives activities. Land-use conflicts are avoided and the environmental impact is minimized.
3. Increase power production and improve return on investment.
4. PV Panels and marine cables installed on water stay cooler, generate more electricity and have a higher ROI than rooftop or ground-mount systems of the same size.
5. Minimize water evaporation, conserve water.
6. By lowering the water temperature and reducing the size of the water area exposed to air, floating solar panels can reduce water evaporation by up to 33% on natural lakes and ponds, and by up to 50% on man-made facilities.
7. Improve water quality and cut maintenance costs.
8. By shading the water, floating solar panels help reduce algae growth.
Floating solar systems can also be outfitted with solar-powered aerators/circulators that oxygenate the water and reduce organic pollution naturally. These solutions minimise the need for harsh chemicals and reduce maintenance costs.
9. Preserve existing ecosystems.
10. No excavation work or concrete foundations are necessary to install floating solar platforms. Floating solar systems are 100% recyclable and are easy to dismantle. Made of HDPE plastic, they can safely be installed on drinking water reservoirs.

The world’s first floating photovoltaic system was installed in 2007 by SPG Solar on a pond at Far Niente Winery in Napa: 1,000 floating panels linked to 1,300 stationary panels on land to produce a total of 4 MW.
Floating PV systems: Photovoltaic systems have been successfully deployed on land and in space for many years, so it was only a matter of time before water-based PV systems emerged on larger scales. Over the past five years, a myriad of floating systems have evolved in varying degrees for use in ponds, reservoirs, canals, rivers and oceans.
Among the benefits of using floating PV systems is the water-cooling effect on silicon solar cells, the natural reflectivity of the water surface, the potential reduction in algae growth due to reduced sunlight penetration, and a lower water temperature in the areas below the arrays.
What was claimed to be the world’s first floating photovoltaic system was installed in 2007 by SPG Solar, of Novato, California, on a pond at Far Niente Winery in Napa. Land in Napa, famous for its wines, can cost US$300,000 per acre, so land use is at a premium. The 1,000 floating panels in the system were linked to 1,300 stationary panels on land to produce 4,000 kW total, utilizing Sharp flat panels and a proprietary mooring system.

Floating solar panels are saving vineyard land, many more are being built, some are even motorised. 

Monday, 9 July 2012

Solar Panel Cleaning

Sunny outlook: solar cells are being improved in order to harvest energy more efficiently.
Solar Panel Maintenance Opportunities: Solar Panels are exposed to the environment – sun, wind, dust, rain etc. Solar panels are very similar to windows, lying flat or at a slight angle which means they get dirty very fast. Pollen, bird droppings, dirt, and dust can build up on solar panels.“Solar Clouding” commonly referred by the panel manufacturers, which means dirty panels and needs to be cleaned on a regular schedule in order to keep them producing at full capacity. There is a 10-15% decrease in solar output when solar panels are dirty.

Solar panels generally require very little maintenance. A few times a year, the panels should be inspected for any dirt or debris that may collect on them. Most manufacturers recommend the cleaning of solar panels every six months. Typically they should be cleaned in March/April when the rainy season has passed and August/September, towards the end of summer. The cleaning services are a necessary part of the system maintenance and also to maintain its warranty.

Having the PhotoVoltaic system cleaned will:
  • Maintain your investment
  • Ensure peak performance
  • Extend the life of your product
  • Maintain product warranty.
How to Clean Solar Panels: One can use a garden hose to wash the face of the panels during either the early morning or in the evening. Care should be taken not to spray cold water onto hot panels or there could be a risk of cracking them. There are also automated cleaners, which can be programmed to clean the panels as needed - a good choice if you are in an especially dusty area. Professional solar panel cleaners are also in abundance and can come out periodically to clean them.

Generally the solar panels are dusted gently and then washed using a soft wash brush to lightly scrub the dirt off. One should check with the solar panel manufacturer to know the best way to clean your solar panels. Hard water should not be used for the cleaning. Also check if there is any blockage from the sun like trees or plants. Clean solar panels are worth the effort.

Checking Solar Panel Operation: The only other part of solar panel maintenance is monitoring their energy output and ensuring there are no malfunctions. Check and log the power output on the solar inverters display on a daily or monthly basis. With this data, one can check to see if solar panels are functioning at full efficiency.  Solar panels produce different amounts of power during the year, so keeping a baseline measurement helps.

Solar Panel Maintenance and Cleaning Companies:

1) GR3 Solar – is a leading solar panel maintenance company throughout the UK, which specializes in the maintenance, repair and upgrades of solar panel installations. The solar maintenance packages can be customized to suit any organizational size, demand and need, whether small business, corporate or public institution or body. It provides services like Solar panel repair, maintenance, upgradation, cleaning, roof vent repairs, photovoltaic repairs, solar panel servicing. GR3 Solar covers both commercial and domestic markets, helping to reach solar panels which are often difficult and dangerous to access for homeowners or building managers. Cracks, breaks, loose connections can be rectified and upgraded, where they have become out-dated. The company’s Health & Safety procedures are constantly reviewed and upgraded and are accredited by CHAS, SAFE contractor and Constructionline.

2) Solar Clean – is a professional solar panel cleaning company. The latest unique & environmental-friendly reach-and-wash cleaning system is used, which ensures perfect cleaning results and is safe for the solar panels. The  system uses approx. 1.5  litres of water per minute. At Solar Clean, services are available to clean all residential, business and corporate solar systems in South Australia. Residential cleaning costs start from as little as $6 a panel, subject to site inspection.

3) Solar Maid – is a leading provider of solar panel washing service, cleaning and maintenance and global solar O&M provider. The company provides residential, commercial and governmental solar panel washing service. Solar Maid was the first company to provide “Janitorial Solar O&M” and is still by far the largest worldwide. Solar Maid sets industry standards for this new service sector. Solar Maid has its headquarters in Pittsburgh, PA with service offices throughout North America and parts of Europe.

4) Solar King - A national company with over 10 years experience Solar King is a leading supplier and installer of Solar PV, Solar Thermal & Ground & Heat Source energy systems for domestic, industrial, and commercial projects across the UK. The services provided are – supply, design, installation, commissioning, handover, maintenance, upgrades and repairs to various microgeneration technologies (Solar Thermal, Heat Pumps, Solar Photovoltaic) to commercial and domestic customers. Solar Power systems that are managed by Solar King can be up to 30% more efficient.

5) Solar Shine – is a professional solar panel cleaning company, using 100% biodegradable cleaning products that are safe for the photovoltaic system and the environment. There are many cleaning packages to choose from. Commercial and residential cleaning are available. Solar Shine offers a cleaning maintenance service, to remove the build up of debris on the surface of  photovoltaic modules.

6) Spectrum Solar – is an Australian owned company. The company is engaged in delivering high end electronic solutions to homes and businesses, for the past 35 years.  The company has installed thousands of solar power systems, in homes, businesses and schools. Spectrum Solar identifies emerging problems like shading, scaling and leaf build up & its scheduled inspection & cleaning service consists of physical inspection, panel cleaning & performance check. The panels are cleaned with purified water and no detergents or chemicals are used.

7) Fortress Complete Cleaning – Founded in Melbourne, is the culmination of over 15 years in the cleaning and maintenance industry. It provides all the equipments to access and clean the panels & cleans the panels using the most appropriate cleaning method for the job, inspects the condition of the frames and mounts & panels and records the output of the system before & after cleaning and finally provides a report on the spot for client’s reference. Solar Panel cleaning starts from 7$ per panel subject to site inspection.

8) Solar Service WA – is a WA owned business who services all of the Perth area. Solar Service WA is fully accredited to the Clean Energy Council. The company is specialized to handle Perth specific problems – like dealing with hard water stains. Water Filtration and De-Ionization equipments are used to make the panels stain free. There are no harsh chemicals used in cleaning the panels and all equipments used are the latest environmental-friendly reach-and-wash cleaning technology, which ensures perfect cleaning results and scratch free brush ensuring crystal clear panels.

9) Watson Window Washing - are currently serving all commercial systems in Southern California and all utility sized systems in California and Arizona. They are  pioneers of the commercial solar panel industry for over 5 years & their completed jobs range from small 350kw rooftop systems to 15mw ground mount utility systems. The company uses super purified water that contains no chemicals or detergents, hence there is no sticky residue left on the solar panels. Therefore, there is nothing for the dust to stick to and they will stay clean up to 10x longer. The solar panels cannot much pressure on them. Hence, long telescopic poles with soft brush heads are used to safely maintain the solar panels, while not applying much pressure. They use a method that does not quickly lower the temperature of the panels otherwise the panels would break.

Cost Involved in  Cleaning & Maintaining Solar Panels

The cost of cleaning a residential solar panel depends upon:
  • Location of the Building
  • Number of Panels
  • Location of panels on the Premises
  • Availability of water.

Tuesday, 14 September 2010

More Interesting Window Cleaning News

Man killed while watching Match of The Day: A man shot dead in south London was deliberately targeted after a petty row, police believe. The 23-year-old, who has not been named, was blasted with a shotgun as he put his head out of a window to see who was knocking at his front door. The victim had been in bed with his girlfriend watching Match Of The Day on Saturday night when the gunman called at his address in west Norwood. Detectives said today the victim, who is Portuguese, was not known to them and had no criminal record. He had been working as a window cleaner and is believed to have got into a row with some men in the previous few days.

This prototype solar island, 10 metres in diameter, is being tested in Al Hamra, Ras al Khaimah. It is a partnership of the Swiss research centre CSEM and Ras al Khaimah. ABU DHABI - If it worked on Mars, it should work here too. The technology that Nasa uses to clean solar panels on its Mars rovers could also, according to researchers at Boston University, be useful in desert environs such as the UAE. Prof Malay Mazumder, a professor of electrical and computer engineering who developed the technology, said that while the country might seem ideally suited for solar energy projects, experts have noted one hitch: dust and sand build up on the solar arrays. A thin layer of fine dust – as little as 4 grams spread across one square metre of a panel – could reduce energy output by 40 per cent, according to Prof Mazumder. His solution? Self-cleaning solar panels that would not require any washing fluid. “The trick here is to apply electrostatic forces to the panel in such a way that the sand particles become charged,” the computer and electrical engineering professor said in an interview from Boston. “They get lifted up from the surface and whipped away.”



The technology would work on Earth as it works on Mars: using a special “electrodynamic screen”, tiny dust particles are captured, charged and swept aside by an electrostatic wave switched on for several seconds. Prof Mark Horenstein, a colleague of Prof Mazumder’s who is also working on the self-cleaning technology, said dust particles “would kind of be hopping and get dragged to the sides” before dropping off. “We summarised the project this way: where do you want to build a solar panel? Where there is a lot of sun. Where is there a lot of sun? The desert. What is there not a lot of in the desert? Water, and there are copious amounts of dust,” he said. The self-cleaning panels could save time and water. “Imagine you sent out a window washer to wash every panel, and maybe it’s a gallon [of water] a panel,” Prof Horenstein noted.



Prof Mazumder said: “I have a student in this campus who’s from Dubai, and he had worked to clean solar panels [in the UAE] with water and chemicals to prevent streaks, and he said it’s a very big mess.” Shariar Faghfooli, the managing director of Gulf Solar Technologies in Jebel Ali, was intrigued by the professors’ possibility. “It would be a good idea, absolutely,” he said. But he added that “the biggest hurdle is lack of awareness. Solar energy has not been implemented enough here – not just the UAE, but in the whole region.” Mr Faghfooli also wondered about costs for retrofitting. “It could be expensive. Maybe the next generation of the panels would be more viable if the price drops.” The target, Prof Horenstein said, was to build retrofittable screens for existing solar panels that would cost as little as US$10 to manufacture. He said that is a good deal because of the money that would be saved on maintenance over the long term. See previous blog here.

Today marks the 33rd anniversary of the murder in police custody of the black consciousness leader and anti-apartheid activist Stephen Bantu Biko, who would have turned 64 on December 18. Yet in defiance of the bounds of grave and time, Biko's spirit continues to be a powerful presence. It still spawns many reincarnations, with the fiery activist Andile Mngxitama as one of many self-confessed embodiments of the black-consciousness leader's contested legacy."I think of myself as a window cleaner (and) writing is one of the key tools I use to clean those dirty windows in people's minds," Mngxitama said in 2009.

Baumgartens, a family business that manufactures people - and planet-friendly products, announced that the U.S. Environmental Protection Agency (EPA) recognizes the company as a partner in the EPA’s Design for the Environment (DfE) Safer Product Labeling program. The DfE label is recognized by retailers and consumers as a mark for products that are healthier for people and better for the environment. Conserve® Glass and Window cleaning tablets can now carry the DfE logo ensuring that the ingredients include safer chemistry which means no harmful ingredients like bleach, ammonia or acids are used in this product.
“Becoming a voluntary EPA partner in the DfE program means that Baumgartens is committing to continually improve products and reduce risk to users and the environment,” said David Baumgarten, vice president. “What’s really special about our innovative cleaning tablets is that aside from safer ingredients, these little tabs represent a massive reduction in CO2 emissions and use of fossil fuels.” One truckload of Conserve Cleaning Tablets (four tablets with bottle) is equal to six truckloads of traditional and green liquid cleaners. “The difference is dramatic when we calculate a truckload of our retail consumer version which eliminates the plastic bottle altogether,” said Baumgarten. “One truckload of our retail consumer tablets calculates to 14 truckloads of liquid cleaners off our roads! This is about so much more than our ingredients. Aside from the cost reduction for shipping these light-weight cleaners, environmental benefits include using 1/10th the fossil fuels, decreasing CO2 emissions, and dumping fewer plastics into landfills.”
DfE is a voluntary partnership program of the EPA that began in 1992. The program recognizes products which are effective and exhibit safer chemistry. “In an independent lab study, Conserve Glass & Window cleaning tablets were just as effective as the leading national brand,” said Baumgarten. “Our products also cost less than all other conventional and green brands out there. You get a full gallon of cleaner with one package which includes a reusable spray bottle and four tablets! Simply add tap water to make four full 32-ounce bottles of cleaner. This is a big win for consumers who want to save money and use household products that are better for their health and the environment.”
Baumgartens is a woman-owned family business supplying unique, innovative products to the school, home and office market that make a difference to thousands of retailers and wholesalers across the U.S.A. Baumgartens successful environmental program, business paradigms, flexible programs and award-winning customer service are unrivaled in the office supply industry. As part of its 2007 Green Initiative, the company planted thousands of trees and has offset hundreds of thousands of pounds of harmful greenhouse gasses. The company aims to be 100% carbon neutral by 2015.

Bringing dignity to labour - Dubai: Modern times demand modern job descriptions. A quick look through job advertisements reveals that today, everything seems to have become more dignified. It is not just the term "facility manager" for a person who used to be called a caretaker, janitor or a custodian. There are more new expressions designed to restore some dignity for people who are normally under-appreciated for the service they provide to the community. For example, what used to be an excavator today is highly sought after as a "soil movement engineer". People who work as window cleaners can be proud of the new job description: "vision clearance engineers."

Living a dream with their own cleaning business - MASON CITY - Jason and Lynn Wise began JasLyn Cleaning Services in May 2004 out of their home in Mason City. Six years later the business, now located at 2025 S. Federal Ave., has grown to 17 employees and more than 200 customers from all over North Iowa. JasLyn has grown 12 to 15 percent each year, even during the harsh economic climate of the past two years, according to Jason. “We have been very, very fortunate,” Lynn said. Jason said his father told him years ago that if you work hard and have a product you believe in and that others believe in, “it’s going to be successful” even in a bad economy. At the time they started JasLyn — a combination of their first names — Jason was a finance manager at Sedars Auto Park and Lynn was a bookkeeper at The Electricians. “I’ve always dreamed of owning my own business,” Jason said.
Lynn said their children were getting older, and they needed more income to help pay for high school and college expenses. Jason continued working at Sedars for a while until JasLyn became a full-time business. At first they just cleaned commercial properties, but now that has expanded to residential properties as well. Jason said in the current economy many people are working two or even three jobs just to get by, so “they don’t have the time to clean their houses.” JasLyn offers carpet cleaning, interior painting, floor care, window cleaning, and deck washing and restaining. JasLyn recently opened a detail shop for vehicle care, offering hand washing and drying, vacuuming, window cleaning, buffing, leather conditioning and shampooing of carpets.
Every member of the Wise family has been involved in the business in some way. Jason began taking his children with him on sales calls when they were in high school so they could get a look at what the business world is like. The Wises said a lot of the success of the business is due to the employees and the level of service offered. Lynn said if customers have an emergency at their house or need to move up their cleaning appointment because they have company coming, nine times out of 10 JasLyn can accommodate their request. “We go the extra mile,” Jason said.

Crawley window-cleaner's son tricked customers out of cash: A window-cleaner's son tricked his father’s customers into giving him cash. Sam Renaud turned to distraction burglary and fraud after his mother told him to leave home and get a job. A judge at Brighton Crown Court gave him an 18-month prison sentence yesterday (Mon) after he admitted two burglaries, four frauds and asked for 80 other offences to be taken into consideration. Renaud, 20, went to 23 homes in Crawley and asked for payment for his father’s window-cleaning service in May this year. Sometimes he was paid about £20, while other householders refused to hand over any cash. He also went to two elderly women’s homes and distracted them while he stole cash. He took about £40 from an 85-year-old woman in Southgate, Crawley, on May 18, after going to her home and asking for £6.50 for window-cleaning.

Aberdeen window cleaner claimed disability allowance: An Aberdeen man has admitted claiming disability allowance while working as a window cleaner. Window cleaner Derek Winton, 50, appeared at Aberdeen Sheriff Court where he admitted committing the crime for more than six months.Winton, whose address was given in court papers as 85 Mansefield Place, Aberdeen, claimed the money between June 30, 2008, and January 6, 2009. The charge said Derek Winton failed to notify authorities of a change of circumstances which affected his entitlement to benefits. And Aberdeen man Derek Winton failed to report improvements in his condition while he was cleaning windows. Sheriff James Tierney deferred sentence until October 11.

A German woman has been put into an induced coma after she was allegedly served glass cleaner instead of water at a restaurant. The woman, from Ulm, was at the restaurant with her husband when she ordered a glass of mineral water, German news website Bild.de reports. A waiter then allegedly brought her a glass of clear liquid that turned out to be a powerful glass cleaner used in dishwashers at the restaurant. The woman, who has not been identified, reportedly only took one sip — but it was enough to cause severe burns to her mouth and oesophagus. The mistake allegedly occured because staff at the restaurant were keeping glass cleaner in the same bottles as mineral water. Following the incident police have launched an investigation into criminal negligence at the restaurant. Owners of the restaurant, which has not been named in German media reports, had originally claimed that the company that produces the mineral water was to blame for the mix-up.

Who is affected by this lead-based paint regulation change?

Anyone who performs RRP activities for profit is affected by the change in regulations. This includes property managers, people performing RRP activities to flip a home for profit, real estate agents doing repairs themselves, contractors and renovators. If you are a Do-It-Yourselfer who is not planning on turning a profit on the property then you are exempt from these regulations. However, the EPA does still advise to follow the safety precautions that they have outlines as lead-based paint dust is very harmful. Basically, if you are performing RRP activities that disturb more than 6 square feet of paint indoors and 20 square feet or paint outdoors, then you must be trained and certified by the EPA.
Maybe you have not performed any RRP activities nor are you ever planning to in the future, you may still be affect by this change in regulation. When selling, renting out, or leasing a home it is now a requirement to disclose any known information about lead-based paint and lead-based paint hazards. This means that if the space you are renting, leasing or selling has been tested for lead-based paint, the test results must be disclosed. If leasing out a pre-1978 property, a disclosure form about lead-based paint must be included in the lease. Sellers must also include a lead-based paint disclosure in the sales contract and buyers are allowed ten days to check for lead hazards.

What is "disturbing" paint?

The EPA considers any action that removes paint from its surface in an area that larger than 6 square feet indoors and 20 square feet outdoors to be disturbing the paint. This includes window replacement, weatherization, and component replacement in a home. Such actions such as scraping, open-flame burning or torching, sanding, grinding, using a needle gun, abrasive blasting and sandblasting are all activities that will disturb paint, and therefore require you to be certified and the EPA’s safety instructions to be followed. Surprising they didn’t include cleaning with TSP.

Tony Gonzalez's Business Facing Wage Charges: INDEPENDENCE, Mo. - A local cleaning company connected to former Chiefs tight end Tony Gonzalez is in hot water over work performed at the Arrowhead Stadium renovation project. The Overland Park company has been charged with 22 counts of failing to pay prevailing wages to employees. Missouri's prevailing wage law applies to publicly funded projects and sets rates for both pay and fringe benefits based on county and job category. The charges, filed in Jackson County, allege XtremeClean88 did not pay the full amount of fringe benefits to the health and retirement fund for Laborers Local 264. Gonzalez's manager, Denise White, said the all-pro tight end, currently with the Atlanta Falcons, is not involved in the day-to-day operations, so he wasn't aware of the situation until KCTV5 called. XtremeClean88's lawyer, Jay Thomas, said the company paid the vast majority of the $26,000 past due amount before the charges were filed. He said the remaining $5,500 is in dispute over the number of hours worked, something the company and the union are still trying to iron out. On its website XtremeClean88 says it offers hood exhaust cleaning, window cleaning, carpet washing, power washing and gutter cleaning. See previous blog here (scroll to bottom).

Sunday, 22 August 2010

Window Cleaning On Mars



Self-cleaning technology from Mars can keep terrestrial solar panels dust free: Find dusting those tables and dressers a chore or a bore? Dread washing the windows? Imagine keeping dust and grime off objects spread out over an area of 25 to 50 football fields. That's the problem facing companies that deploy large-scale solar power installations, and scientists today presented the development of one solution -- self-dusting solar panels -- based on technology developed for space missions to Mars.

In a report at the 240th National Meeting of the American Chemical Society (ACS), they described how a self-cleaning coating on the surface of solar cells could increase the efficiency of producing electricity from sunlight and reduce maintenance costs for large-scale solar installations.

"We think our self-cleaning panels used in areas of high dust and particulate pollutant concentrations will highly benefit the systems' solar energy output," study leader Malay K. Mazumder, Ph.D. said. "Our technology can be used in both small- and large-scale photovoltaic systems. To our knowledge, this is the only technology for automatic dust cleaning that doesn't require water or mechanical movement."

Mazumder, who is with Boston University, said the need for that technology is growing with the popularity of solar energy. Use of solar, or photovoltaic, panels increased by 50 percent from 2003 to 2008, and forecasts suggest a growth rate of at least 25 percent annually into the future. Fostering the growth, he said, is emphasis on alternative energy sources and society-wide concerns about sustainability (using resources today in ways that do not jeopardize the ability of future generations to meet their needs).

Large-scale solar installations already exist in the United States, Spain, Germany, the Middle East, Australia, and India. These installations usually are located in sun-drenched desert areas where dry weather and winds sweep dust into the air and deposit it onto the surface of solar panel. Just like grime on a household window, that dust reduces the amount of light that can enter the business part of the solar panel, decreasing the amount of electricity produced. Clean water tends to be scarce in these areas, making it expensive to clean the solar panels.

"A dust layer of one-seventh of an ounce per square yard decreases solar power conversion by 40 percent," Mazumder explains. "In Arizona, dust is deposited each month at about 4 times that amount. Deposition rates are even higher in the Middle East, Australia, and India."

Working with NASA, Mazumder and colleagues initially developed the self-cleaning solar panel technology for use in lunar and Mars missions. "Mars of course is a dusty and dry environment," Mazumder said, "and solar panels powering rovers and future manned and robotic missions must not succumb to dust deposition. But neither should the solar panels here on Earth."

The self-cleaning technology involves deposition of a transparent, electrically sensitive material deposited on glass or a transparent plastic sheet covering the panels. Sensors monitor dust levels on the surface of the panel and energize the material when dust concentration reaches a critical level. The electric charge sends a dust-repelling wave cascading over the surface of the material, lifting away the dust and transporting it off of the screen's edges.

Mazumder said that within two minutes, the process removes about 90 percent of the dust deposited on a solar panel and requires only a small amount of the electricity generated by the panel for cleaning operations.

The current market size for solar panels is about $24 billion, Mazumder said. "Less than 0.04 percent of global energy production is derived from solar panels, but if only four percent of the world's deserts were dedicated to solar power harvesting, our energy needs could be completely met worldwide. This self-cleaning technology can play an important role."

Wednesday, 18 August 2010

Glass News For The Discerning Window Cleaner

The miracle spray-on glass that stops the bugs: Alder Hey Children's Hospital in Liverpool is coating the toys in its wards with a revolutionary form of "liquid glass" that has proven in trials to reduce the number of disease-causing bacteria living on the surface of objects. Severely ill children being treated at Alder Hey are often not allowed to play with the hospital's pool of toys because of fears that infections will be passed between patients, some of whom may have suppressed immune systems resulting from their life-saving treatment. The liquid glass, which is safe and completely inert, forms an invisible, flexible coating on the surface of an object and repels dirt and grime. More importantly, it is believed to prevent the build-up of hospital-acquired infections such as the superbug Staphylococcus aureus, which is resistant to many antibiotics.
Alder Hey is testing the experimental coating on the toys in its children's wards because these shared objects come into intimate body contact and could easily become a source of a hospital-acquired infection spread between the children. "We have an awful lot of toys and many of them are difficult to clean. We even have to remove some of them because they are so difficult to keep clean, yet they are so important for the children," said Pauline Bradshaw, operational director of infection, prevention and control at Alder Hey."We view toys in the same frame as any other medical device that has to be cleaned and decontaminated. Once the toy is coated with the liquid glass you cannot see any difference whatsoever. I think it's got great potential not just for toys but for other hospital settings," Ms Bradshaw said.
Tests of the liquid glass in another nearby hospital, Southport and Formby District General, have shown that coating surfaces such as floors, bedside tables, washbasins, toilet handles and lift buttons, can reduce bacterial growth by between 25 and 50 per cent. The three-month trial at Southport compared surfaces coated with the liquid-glass, made by a German company called Nanopool, against untreated surfaces. Hospital staff followed their usual cleaning routines and were not told which surfaces had been coated. Scientists took swabs of different hospital areas every week for the 12-week period and the final results demonstrated a clear, statistical difference in bacterial load between the treated and untreated surfaces, according to the official evaluation of the trial. "These initial results suggest that the Nanopool coating would be effective in reducing levels of contamination on a range of surfaces in hospitals and could potentially improve the efficiency and effectiveness of the cleaning regime," the report says.
"The evaluation also confirmed that the Nanopool coating can be applied in a busy hospital setting with relative ease and with minimal disruption," it says. The liquid glass, a form of silicon dioxide in solution, was originally developed as an anti-graffiti coating for the outside of buildings but scientists soon realised that it had the potential to act as an anti-bacterial barrier. Nanopool said that it has conducted tests at a meat-processing plant in Germany and found that cleaning treated surfaces with hot water was just as effective at killing bacteria as cleaning untreated surfaces with a bleach solution.
Neil McClelland, Nanopool's UK project manager, said that the liquid glass coating is just a few millions of a millimetre thick and the electrostatic forces on the nanoscale film repel water and dirt. They also prevent bacteria from replicating in the way they would normally do on an untreated surface, he said. "The tests show that we can reduce bacterial loading by between 25 and 50 per cent at a stroke and I suspect it may be higher with a bespoke cleaning method we are developing. As soon as the data on the trial was released we got a request from the same hospital in Southport to coat 150 toilets," Mr McClelland said. Brent Dunleavey, the managing director of Radal Technology, which is subcontracted by Nanopool, is working with Alder Hey and other NHS hospitals interested in using liquid glass to coat surfaces at risk of spreading superbugs. The trial on the Alder Hey toys will involve a new cleaning method that does away with the usual caustic, bleaching agents and instead uses a "skin-safe, food-safe biocide", said Mr Dunleavey. Conventional cleaning products used in hospitals often leave a residue that could interfere with the anti-bacterial properties of the liquid glass, he said. Previous blog on nanopool here.

Volvo sues Pilkington over 'price-fixing': The claim by Volvo could run into millions of pounds and will pit the car maker's new Chinese owner, Geely, against Nippon Sheet Glass (NSG), the Japanese company that bought Pilkington for £2.2bn in 2006. In December 2008, the European Commission found Pilkington and three rivals – Asahi, Saint-Gobain and Soliver – had breached competition law by conspiring to fix prices and allocate markets for car glass products between 1998 and 2003.

Glass Pool Walls See Increasing Popularity in Australia: Glass and glazing trends vary from country to country. In Europe, for example, double-glazed facades are quite common, while in Australia, glass railings and balustrades can be seen on many homes, condos and hotel projects. In addition to balcony and patio railings, glass walls surrounding pools are also growing in popularity in Australia. “[Large-scale], frameless, glass pool walls are at the top end of the affordability scale,” said Vince Bianchini with Cooling Brothers, an Australian glass company located in High Wycombe, Western Australia. “There is an increasing trend for glass pool windows, which our company engineers, supplies and installs on a regular basis.”

Glass or metal? That could become an increasingly important question for developers of concentrating solar power projects. A growing number of companies, from 3M to Abengoa Solar, are working on mirrors made of metals and polymer that aim to be lightweight and cheaper than the glass variety. 3M is doing a pilot-stage launch of its Solar Mirror Film, and it’s planning for a full commercial launch by the end of the year, said Daniel Chen, business development manager of 3M’s renewable energy division. “Saving time and material costs are the big advantages,” Chen said during a recent poster session at 3M’s headquarters in Minnesota. Metallic films “also are easier to transport – you can pack them densely and use aluminum locally” for project construction.
Like GE and other titans in their industries, 3M is keen on winning a fat slice of the growing renewable energy market. The use of metal film, which is then laminated onto an aluminum backing, isn’t a new concept, and 3M launched a similar product in the 1980s. It lasted for 4-5 years before the entire market disappeared, Chen said. The company restarted the research in this area about two years ago, when the solar industry began to revive in earnest. Proponents say metal mirrors are suitable for all types of solar thermal power plant designs, including parabolic trough, power tower and stirling dish. But replacing glass, a durable and highly reflective material with a long history of surviving the outdoors, won’t be so easy. Investors and utilities tend to prefer well-proven technologies over novel ones. The largest solar thermal power complex in the world, the 354-megawatt solar field in the Mojave Desert, was built between 1984 and 1991 with glass mirrors.



Glass-bottomed hot air balloon takes its maiden flight: These stomach-churning images capture the moment the world's first glass-bottomed hot air balloon took its maiden flight today. The traditional wicker four-man basket has a completely transparent floor which provides passengers with heart-stopping views of the scenery below. The balloon took to the skies over Bath, Somerset, to mark the start of the 2010 Bristol International Balloon Fiesta. The basket was the brainchild of Christian Brown - a pilot with 18 years experience flying balloons - who admitted the flight was a 'terrifying experience'. He said: 'We've done tethered trials before, which usually end with passengers shrieking and screaming in fear, but this is the first time we've actually taken to the skies unaided. 'Ordinarily, you would look over the edge of the basket to peer at the ground below but there is something very disconcerting about seeing it right beneath your feet. The traditional wicker-sided basket carries up to two passengers and two pilots who stand on two-inch thick glass. Christian, 44, travelled the world in a balloon with tycoon Richard Branson and currently holds the tethered altitude world record after flying at 10,000ft on a mountain in Chile. Click pictures to enlarge.

The CEO of Molded Fiber Glass Companies, a distinguished international composites manufacturer, has earned additional recognition while serving as honorary president of the recent JEC Composites tradeshow in Paris. Richard Morrison opened the global show and served as a host for the awards ceremony. He also presented an overview of the fast-growing U.S. wind energy market, which Molded Fiber Glass (MFG) supports by manufacturing blades for wind turbines. During the global show, MFG was cited as one of the most “innovative advanced composite enterprises in the United States.” “As in other sectors, composite processors are currently under pressure, squeezed between raw material suppliers, who are hiking up their rates, and customers, who are holding out for better prices,” said Frédérique Mutel, president and CEO of the JEC Group, which promotes the use of composites worldwide.

Pilkington owner Nippon Sheet Glass expects profits: Pilkington owner Nippon Sheet Glass (NSG) is now expecting to go back into the black this year as the global recovery is increasing demand for its products. The company had forecast that it would make a loss of £29m in the year to March, 2011, as its key markets in construction and the automotive sector remain depressed. But improvements in both those markets mean it is now predicting a net income for the year of £7m. Its annual sales forecast remains constant at £4.4bn, thanks to the effects of the strong yen. In another sign that its markets are strengthening, last month Pilkington announced it was to restart one of its St Helens float lines in a move that will create up to 130 jobs. The decision was attributed to strong demand in South America.

47-inch touchscreen machine launched: No one has embraced the technological revolution quite like the Japanese. And when we say embraced, we mean produced a number of impressive, hi-tech gizmos and gadgets that could definitely be classified as exorbitant. And this latest bit of futuristic kit, without doubt, falls into that category. Because Japanese firm JR East has developed a vending machine that does away with the old fashioned method of simply looking through the glass and choosing the actual product you want, and instead gives the user a digital representation of what's on offer via a 47-inch touchscreen display. The display is also fully customised for the user, based on their age and gender, (it scans them using an embedded camera) and can also use its WiMAX capabilities to store buyers' purchase history.

Soladigm to Build $130 Million Factory, Create 300 Jobs in Mississippi: Soladigm, a developer of high-tech materials for energy efficient glass windows, announced that it will invest $130 million to build a factory in Olive Branch, where it expects to create about 300 jobs that will pay between $18 to $25 an hour. To attract the company here, the State of Mississippi is providing a $40 million loan and another $4 million of incentives for project improvements. Founded in 2007, Soladigm is currently operating a pilot production line at its headquarters in Milpitas, Calif. The company is backed by around $40 million of venture capital investment from Khoshla Ventures and Sigma Partners. In June, the U.S. Department of Energy also provided Soladigm with a $3.5 million stimulus grant.
Soladigm’s products include recent advancements in glass, optical coatings, and semiconductor technologies. Its glass can change from clear to tinted on demand, controlling the amount of light and heat that enters a building, resulting in energy savings. “The combination of Mississippi’s dedication to manufacturing, the proximity of our new plant to Memphis, the nation’s logistics and distribution hub, and Governor Barbour’s tremendous support were key factors in us determining to locate our first high volume manufacturing facility in Olive Branch,” said Rao Mulpuri, CEO of Soladigm.

Spanish glass-maker for solar plants to build $50 million US headquarters in Phoenix suburb: SURPRISE, Arizona. - A Spanish manufacturer of glass for commercial solar plants announced Wednesday that it will build a $50 million U.S. headquarters in the Phoenix suburb of Surprise.
Rioglass Solar said the 130,000-square-foot facility will employ more than 100 workers. An additional 130,000 square feet of manufacturing space is on the drawing board. The company makes curved glass sheets used in solar plant parabolic concentrators. It is a subsidiary of Rioglass Solar Holdings.

Construction of the Kauffman Center for the Performing Arts this week entered an important phase with the installation of the first of nearly 1,400 exterior glass panels. The glass will form the dramatic transparent canopy enclosing the southern face of the arts center and what will be its four-story-tall grand lobby. Each glass panel, fabricated in China, is affixed to a complex, intricately engineered network of masts and cables.



28 'gorgeous' windows given new life: As a teenager growing up in Germany, Paul Winter was given two career options: organ builder or stained-glass expert? "I really wanted to be a civil engineer building airplanes, but that wasn't possible in Germany in 1946," he said. "So I chose stained glass, because I thought there would be fewer costs than organs." More than 60 years later, Winter is still working at his colourful craft, using his talents to brighten up an Edmonton religious institution.
Winter, 80, is considered a master in stained glass, a job that requires the technical skills of a tradesperson and the vision of an artist. He trained for several years in Germany before moving to Edmonton in the late 1950s. Despite the fact his field has relatively few clients, he has maintained a busy career travelling all over the world designing, fixing and installing stained glass for virtually every Christian denomination.
"Sometimes you do one window, and sometimes the whole church," said Winter, who seemed destined for such a profession considering he was born in a church near Cologne and his father worked in one. "I don't think there is anybody else in Alberta right now who can do this kind of work."
The job is highly specialized and can also be dangerous. Winter remembers one project when a piece of falling glass sliced through his shoe and pinned his foot to the floor. "I couldn't move. I had to yell for help." His son, Andre, said there has been a fair amount of blood on the current seminary job. "These windows are one-inch thick. They're very heavy and very sharp, so there were a lot of cuts," Andre said. "I think Dad and I averaged about two to four Band-Aids per window."

1962 glass invention poised to become multi-billion dollar seller: In the 1960s, an ultra-strong glass was invented but it contained no purpose. Nearly a half a century later, Corning Inc. is expected to sell a multi-billion dollar product by installing the glass to face of touch-screen tablets and plasma televisions. Corning Incorporated is expected to rake in billions of dollars over the next little while a 1962 invention of an ultra-strong glass – Gorilla - is poised to be the face of touch-screen computers and plasma televisions

Search This Blog