Showing posts with label nyc. Show all posts
Showing posts with label nyc. Show all posts

Monday, 16 May 2016

The Last Strap Hanging Window Washer In New York

Those sash windows. The last strap hanging window washer in New York.
The last strap hanging window washer in New York: This video shows the last known strap hanging window washer in New York. Charlie, on the eleventh floor of Manhattan’s Chanin Building, opens a metal clamp attached to a leather strap around his waist and swings out, pinning it to one corner of the window frame. After attaching the second clamp, he gets to work suspended high above 42nd street.

According to YouTuber Giselle Benatar, he cleans all the windows of the Chanin Building which is sixty stories high. The Chanin building still has windows that open by sliding up and down, in other buildings, these have been replaced with new windows that flip in and out meaning you can wash them from the inside.

Benatar says, “most buildings no longer need window washers with Charlie’s formidable free-form suspension skills.” The union says he’s the last strap hanging window washer in the city.


Nerves of Steel: Last strap hanging window washer in New York (by Giselle Benatar): A sharp rap on my office door, and there stands Charlie. “You got flowers,” he says,"You need those windows washed.” I warily agree, so he carefully removes the flower pots from my window sill and plants his work boots. Opening a metal clamp attached to a leather strap around his waist, he swings out and pins it to one corner of the outside window frame. My office window is eleven stories up in Manhattan's famous Chanin Building, mind you…. Oh my god - don't look down!

Charlie calmly attaches a second clamp and sets to work, suspend high above the cars and buses furiously inching their way along 42nd street. He cleans the windows of all sixty stories of the Chanin Building. I try hard not to picture him doing this sixty stories up. The Chanin still has windows that open by sliding up and down, he explains. In other buildings, they’ve replaced these with new windows that flip in and out, the kind you can wash from the inside. Most buildings no longer need window washers with Charlie's formidable free-form suspension skills.

He thought about retiring to Florida with his wife. They went down for a week’s vacation, but ended up coming back two days early. "Nothing to do there. People walked around like this," he says, mimicking a sleepwalking zombie. So he's back where he belongs, hanging eleven stories above the streets of New York. He's the last strap hanging window-washer in the city. They asked around at the union, and no one else came forward. Inspired by Humans of New York, I had to capture this. See how he does it!

Wednesday, 4 May 2016

Window Cleaner To Stars Slipped Without Harness

Paul Benalcazar, 57, of Monroe Township, N.J., was working on E. 81st St. near Park Ave. Monday at about noon when he fell from the second floor, police and relatives said.

Brother of window washer who fell to his death remembered as a helpful provider for his family whose clients included Woody Allen, Diane Sawyer: The distraught brother of an enterprising window washer who fell to his death from an Upper East Side town house said he wasn’t wearing a safety harness and slipped.


Paul Benalcazar, 57, of Monroe Township, N.J., was working on E. 81st St. near Park Ave. Monday at about noon when he fell from the second floor, police and relatives said. “Unfortunately, he slipped and lost his grip while he was cleaning the outside of a window,” said JR Gaete, 49, of North Carolina, as he prepared to fly to New York to help his grieving sister-in-law. “His wife was cleaning one of the mirrors in one of the bathrooms, and she heard the housekeeper scream and yell, ‘he fell out the window!’” Gaete said.

Gaete said his brother was born in Ecuador, but moved to the U.S. when he was 8. “He was a best friend, a great brother, a fantastic father and a great husband,” Gaete said. “If I called him and asked for help, he wouldn't ask why, he would just drop everything.”

Benalcazar went to John Baum High School in Queens, and then started washing windows for his future father-in-law some 25 years ago. He later inherited the company, known as Elite Window Cleaning, and often worked alone while his wife Maryann helped out. Benalcazar’s clients have included Woody Allen, Diane Sawyer and members of the Rockefeller family, Gaete said.

In addition to his wife, Benalcazar had a daughter, Ana, who was about to get married and a son, Paul Jr., who just graduated high school. “We were planning to come up on the 13th to go to his daughter’s bridal shower,” Gaete said.

Benalcazar wasn’t a fan of using a safety harness despite the fact that he worked as many as 30 stories above the ground, Gaete said. “A lot of times, he told me he didn't trust the rigs,” he said. “He relied on his hands.”

He last saw Benalcazar three weeks ago. “My 7-year-old son once asked him ‘What do you do?,’” he said. “Paul told him, ‘I'm Spiderman.’ I go outside buildings and I climb.” The family asked that in lieu of flowers, donations should be made in Benalcazar’s name to the American Cancer Society.

Benalcazar wasn't wearing his safety harness when he slipped and fell to his death from an Upper East Side townhouse.

Tuesday, 3 May 2016

NYC Window Washer Plummets To His Death

Officers at the scene where a window washer fell to his death at 115 E. 81st Street. Police say the 57-year-old man fell at about 11:40 a.m. Monday while cleaning a third floor window on East 81st Street.
Window washer plummets to his death on the job: A window washer fell to his death from an Upper East Side town house Monday afternoon, police said. Paul Benalcazar, 57, was working at 115 E. 81st St. at around noon when he fell from the second floor, police sources said.

“He and his wife have a company washing windows,” said Ed Stern, the building’s owner for more than 20 years. “I have a home office. I heard a commotion and I followed it up. [Witnesses] were saying, ‘He’s dead. He’s dead.’ “It’s just a tragic accident and very upsetting,” said Stern, who says he called 911. “It shows you how precious life is.”

The man was washing a window at a townhouse on East 81st Street near Lexington Avenue at about 11:45 a.m. when he the incident happened.  

Thursday, 19 November 2015

New York - Toronto - Scaffold Malfunctions

Two workers were rescued after a scaffold malfunction in NYC, when the platform/scaffold got stuck on the exterior of the 22nd floor of the building at W. 38th St. and 6th Ave. Responding firefighters had to cut a glass window on the 22nd floor to free the trapped workers, officials said.





2 Workers Rescued From Scaffolding Outside Midtown Skyscraper: Two window washers were rescued from scaffolding after becoming stuck 22 stories up at a 30-story skyscraper on Fifth Avenue Wednesday, authorities say. The movable scaffold got stuck after its electricity died, according to a source at the scene. As a result, the device wasn't able to move up or down, trapping the workers.

FDNY crews rescued the workers by cutting through a double-pane glass window. The workers were not injured, the source said. The scaffolding company will work to determine what went wrong with the scaffold, which was still hanging from the building at 3:30 p.m. Mechanics at the scene planned to raise the scaffold to the roof, fix it and then lower it to the ground.

Two window washers were rescued from scaffolding after becoming stuck 22 stories up.
Three Men Rescued From Swing Stage 23 Floors Up At Bay And Queen (Toronto, Canada) - Three men have been brought to safety after spending hours trapped on a swing stage outside the 23rd floor of a highrise  in the cities downtown core. It’s believed the men spent four hours stranded on the stage in the area of Bay Street and Queen Street West.

Nearly 20 firefighters were involved in the rescue of the window washers which got underway just before 6 this evening, with the rescuers removing a window pane to reach the men. They were rescued at around 7.p.m and no injuries were reported. Roads in the area had been closed for a time to facilitate the rescue but have since fully reopened.

Five trucks and approximately 20 firefighters worked to remove a building window to access the Toronto window cleaners.

Tuesday, 8 September 2015

Shortage Of Glass

A typical high-rise office tower can need hundreds of thousands of square feet of metal-framed glass panels. A Brookfield Property under construction in New York City.
Cost of Skyscraper Glass Hits Dizzying Heights - Earlier manufacturing cutbacks create delays, add to price tag as construction rebounds: A shortage of glass is taking a toll on the nation’s commercial building boom, adding millions of dollars to the cost of new skyscrapers and halting some projects midway through construction.

Demand is soaring for the metal-framed glass panels, or curtain wall, used to sheath skyscrapers. Those buildings need a lot of glass—hundreds of thousands of square feet for a typical high-rise office tower.

Glass manufacturers and fabricators can’t keep up. Many glass makers mothballed their operations or went out of business in 2008 and 2009, during the recession, which hit the construction industry hard.

Now, however, apartment buildings are sprouting up at their briskest pace in decades, and new office towers are rising in major markets like Manhattan at the fastest rate since the early 1990s.

Restarting idled glass factories is a costly and time-consuming process, so property developers say the current shortage could last well into next year, if not longer.

In the meantime, builders are reporting that curtain-wall prices, which have risen more than 30% in the past 18 months, are setting records.

Glass accounts for roughly one-quarter of a construction project’s budget, so the extra expense can add tens of millions of dollars to a building’s cost, according to Brett Atkinson, executive vice president of Moss & Associates, a Florida-based company with 30 buildings under construction that require curtain wall.

New Hudson Facades is a glass-making business that is an offshoot of real-estate developer Related Cos., which teamed up with a specialty-metal manufacturer so as to ensure a supply of glass panels.
Delays are also a problem: Several towers in San Francisco’s trendy Rincon Hill neighborhood, home to some of the city’s most expensive apartments, are standing bare while their builders wait for glass.

“Nowadays, the glass guys are dictating the timetables of a project to us, instead of the other way around,” said Ralph Esposito, who oversees commercial construction by the New York office of Lend Lease Corp., one of the country’s largest building contractors, with nearly 30 high-rise towers under way. “I don’t think people had the leap of faith that the [real-estate] industry would be as strong as the run we’re currently on.”

The glass that ends up on the outside of an office building is manufactured in giant tanks in which sand is melted at temperatures north of 2,000 degrees Fahrenheit. Long ribbons of raw glass are floated down a river of molten metal. This “float glass” is then cut into pieces, customized to order, and the panels are sent to contractors who fit them into metal frames to produce panels that meet the builder’s specifications. A contractor typically installs the curtain wall on the side of a building.

Producers shut 11 out of 47 float-glass manufacturing plants in North America between 2007 and 2014, according to PPG Industries Inc., a Pittsburgh-based glass maker, as demand for glass of all kind—from building facades to auto windshields—sagged during the downturn. Building a new plant can cost hundreds of millions of dollars, PPG says, and restarting an idled line can take months because workers have to jackhammer thousands of pounds of hardened glass to remove it from melting tanks.

“Once you take one of those tanks out of commission, you can’t just turn it back on,” said Glenn Miner, director of construction for PPG’s flat-glass division. The downturn “affected all the suppliers in the marketplace. None of them were unscathed.”

New Hudson Facades is producing mockups for the panels set to go on the Manhattan building.
As the glass shortage worsens, some developers are taking matters into their own hands. This summer, Related Cos., a large New York real-estate firm, got into the glass-panel manufacturing business. Teaming up with M. Cohen & Sons, a specialty-metal manufacturer, the developer, opened a $16 million, 180,000-square-foot factory in a wooded industrial park in Linwood, Pa., near the Delaware border.

Related, which is known for glitzy properties like Manhattan’s Time Warner Center, decided to open its own curtain-wall factory after waiting months for delivery of window panels intended for new apartments last year in the New York borough of Queens.

The developer needs more than 3,000 panels of architectural glass for an apartment tower it is building on Manhattan’s West Side, said Bruce Beal Jr., Related’s president.

The new glass company, dubbed New Hudson Façades, is producing mockups for those panels. It predicts that by next year its factory will be at full capacity, producing two million square feet of curtain wall annually.

“With the logistical issues, small number of producers and growing costs, we’d rather bet on our ability to domestically produce and control the supply” of glass, Mr. Beal said.

The glass industry is gearing back up, but progress is slow because some parts of the supply chain still haven’t recovered from the recession, said Troy Hansen, director of materials at Viracon Inc., a division of Minneapolis-based Apogee Enterprises Inc. and one of the largest fabricators of the glass panes that go into curtain wall.

“As these [float glass] plants have shut down, glass has to travel farther and farther from the raw manufacturer to our facilities,” Mr. Hansen said. “There’s definitely a future of shortage of raw glass coming.”

Viracon closed one of its three manufacturing plants, in St. George, Utah, in early 2013 amid flagging demand. In late 2014, as construction picked up, the company rushed to bring the plant back online. Even so, Viracon told customers in July that prices would rise by as much as 12% due to shortages of float glass, a once-unusual price increase that is becoming commonplace, Mr. Hansen said.

Scott Kinter, a senior vice president in Boston with AvalonBay Communities Inc., one of the largest U.S. apartment-builders, said his team began hearing about glass-related delays about a month ago, and he expects a significant curtain-wall shortage in the fourth quarter of 2015 and into early 2016. Prices are up between 35% and 45% from 2013, he said.

“Everyone is so busy and they can’t keep up with the demand,” he said. “If I were starting a new high-rise anywhere on the East Coast today, the first thing I’d try to lock down is the glass. Then I’d pray nothing goes wrong.”

Monday, 3 August 2015

$13.1375 Million To Window Cleaning Survivor

Alcides Moreno: Alcides, a window washer, was working when a malfunction caused the platform to send him and his brother Edgar down 47 stories.
'Antin Ehrlich & Epstein' Helps in Getting Amount of $13.1375 Million to Survivor Who Fell from Roof of Building (New York, NY): The lawyers of 'Antin Ehrlich & Epstein' have helped the survivor to get a claim of $13.1375 Million from the owner of the building. The worker fell from the 47th floor of the building due to the negligence in safety.

Antin Ehrlich &Epstein, a well-known law firm for accident and injury attorneys has helped a survivor who fell from the roof to get the amount of $13.1375 Million. The settlement was done by one of the NYC personal injury lawyers at Antin. Sources have confirmed that the survivor is the window washer. He was cleaning the widow of a 47 story building. Due to negligence in safety by the building owners and the scaffolding company for the worker, the survivor fell from the 47th floor of the building. Though, doctors were able to save the life of the window washer.

Speaking to the media, one of the lawyers of the law firm said, "This case was really important for us. We wanted that the survivor should get justice. Every life is precious. We had the complete evidence that the person fell from the building because of safety negligence."

The lawyers of 'Antin Ehrlich & Epstein' argued about the safety measures in the court and asked to settle the situation if the owner of the building pays the amount of $13.1375 Million to the survivor. The case was settled in New York. Also here.

Wednesday, 4 March 2015

No Harness - No Safety Equipment

The victim, who sources said was not wearing a harness at the time of the fatal accident, fell from a building at Greenwich and Jay streets at 1:10 p.m. Tuesday and landed in front of the high-end rug store Carini Lang.
Window washer 'working without a harness' plummets to his death from fifth floor of Manhattan apartment building: A worker plummeted five stories to his death while washing windows without a safety harness in Manhattan Tuesday. The unnamed victim was reportedly leaning out of a fifth-floor unit at the Hanover River House at 335 Greenwich Street in Tribeca when fell just before 1.10pm. The window washer landed in front of a high-end rug store, with his head coming to rest in a pile of hardened snow and the rest of his body on the concrete sidewalk.

Click to enlarge.
Horrified witnesses said the victim was still breathing and conscious by the time first responders came on the scene. As they were awaiting the paramedics’ arrival, several Good Samaritans walked over and covered the man with their coats to keep him warm against the frigid temperatures, according to the New York Post. Responding EMTs performed chest compressions on the injured worker and then rushed him to New York Downtown Hospital, where he died a short time later.

The man was cleaning the window from the inside and was not wearing a harness. The window was unhinged and swung open, and he fell out  in front of a high-end rug store.
The window the man was washing was unhinged and swung open, causing him to fall out to his death. Witness Orie Cipollaro described the 38-year-old worker hanging out of the window backwards in the minutes before the deadly fall, while another bystander claimed he saw the man hold onto the window with one hand while washing it with the other, reported the New York Daily News. In an interview with the News, witness John Cataneo described a grisly scene on Greenwich Street this afternoon.‘His legs were twisted his arms were bent and he was bleeding from his hands, it was very gruesome,’ Cataneo recalled. The name of the victim has not been released as of 5pm, but he was said to be a 38-year-old man employed by Aerial Window Cleaning

“Any kind of contracting activity like that you have to take your safety equipment seriously and make sure you have got it and it’s in good working condition.”
A window washer fell from scaffolding and plummeted five floors to his death in Tribeca, authorities said. The victim, who sources said was not wearing a harness at the time of the fatal accident, fell from a building at Greenwich and Jay streets at 1:10 p.m. Tuesday and landed in front of the high-end rug store Carini Lang. “He was sitting outside the window, and just holding on with his left hand while cleaning the window with his right hand,” said Edin Arias, 39, a carpenter who was working in the area.

“When I saw him he wasn’t wearing no harness nothing to get him safe, nothing to keep them safe,” Arias said. “I was surprised he wasn’t wearing any safety equipment,” said John Cataneo, who works as a plumber and witnessed the fatal plunge. “Any kind of contracting activity like that you have to take your safety equipment seriously and make sure you have got it and it’s in good working condition.” The victim, who has not been identified, was pronounced dead at a nearby hospital.
“There was a woman standing in front of me with a stroller and she started screaming, ‘A man fell, call 911!’ I didn’t get too close but I saw his head was on the snow,” the witness, who refused to be identified, explained.


From a reader: “The strange thing about that window washer story is that about 3 weeks ago a man fell from the top floor of the Puffy’s building and landed right at my feet as I was waiting for the bus! I believe he was a window washer as well. Did you hear anything about that story? I have been wondering if he survived that fall—I called 911 right away and stayed with him until they took him away in the ambulance. Later that day I called 311 to see if I could find out about his condition and they could only tell me that he arrived at Bellevue alive.”

Tuesday, 3 March 2015

Window Washer Falls To His Death From Fifth-Floor Apartment In Tribeca

A man in his 30s fell out of a fifth-floor apartment while washing windows at a Tribeca building on Tuesday, police said. Click to enlarge.
A man fell from scaffolding and plummeted four floors to his death when his head landed on an iced-over snow pile in TriBeca, authorities and police said. The victim, who’s believed to have been a window washer, fell from a building on Greenwich and Jay streets at 1:10 p.m., Tuesday and landed in front of the high-end rug store Carini Lang, authorities said. “His head landed in the snow is what it appeared like. The other half of his body was on the sidewalk,” a witness said. “He was breathing. Everyone surrounded him and put their coats on him to keep him warm. His head landed in the snow pile and his legs and feet were on the concrete,” the man added. “There was a woman standing in front of me with a stroller and she started screaming, ‘a man fell, call 911! I didn’t get too close but I saw his head was on the snow,” the witness who refused to be identified explained. The victim, who has not been identified, was pronounced dead at New York Downtown Hospital.


Window washer falls to his death from fifth-floor apartment in Tribeca: A window washer who was leaning out a fifth-floor apartment without a harness plunged to his death in Tribeca Tuesday afternoon, cops said. The man, whose identity wasn’t immediately released, was leaning out to clean a window at 335 Greenwich St. when he fell about 1:09 p.m. A police source said he was in his 30s. This is a developing story. Check back for updates.


Tribeca Window Washer Falls To Death From 3rd Floor Window: A window washer in his 30s fell to his death from a third floor window in a Tribeca building this afternoon. Police and FDNY officials confirm that the man, who has not yet been publicly identified, fell shortly after 1 p.m. from a window at 335 Greenwich Street. One police source told the Daily News the worker was cleaning a window without a harness. An FDNY spokesman said the man was "awake and breathing" when first responders reached him, but officials say he was pronounced dead at approximately 1:30 p.m. at New York Downtown Hospital. Witnesses say the worker landed in front of a high-end rug store called Carini Lang. "His head landed in the snow is what it appeared like. The other half of his body was on the sidewalk,” a witness told the NY Post. "He was breathing. Everyone surrounded him and put their coats on him to keep him warm. His head landed in the snow pile and his legs and feet were on the concrete."

Window Washer Critically Hurt After Falling From Fifth Floor, Officials Say (MANHATTAN) — A window washer was critically hurt after falling from the fifth floor of a TriBeCa apartment building Tuesday morning, officials said. The man, who is in his 30s but whose name was not immediately released, tumbled from the Hanover River House at 335 Greenwich St., near Jay Street, just minutes after 1 p.m., according to NYPD and Department of Buildings officials. The man was taken to Lower Manhattan Hospital, officials said. Police said he was in critical condition. Units in the building have sold for as much as $1.75 million, according to previous listings.

Monday, 19 January 2015

Window Washer Gets $8M Settlement

Orbe's safety belt (seen on the sidewalk in front of the Council on Foreign Relations building) most likely saved him from being impaled as he fell, according to court papers. Click to enlarge.
Window washer gets $8M settlement for Upper East Side plunge: Faby Del Orbe suffered several fractures and fell into a coma for three weeks when he fell from the Council on Foreign Relations building on Park Ave. in September 2012, according to court papers.

The Council on Foreign Relations has paid an $8 million settlement to a Brooklyn window washer who plunged four stories from the venerable institution’s landmark building on the Upper East Side, the Daily News has learned. Faby Del Orbe had hooked his safety harness to the exterior anchors of a fourth-floor window of the Harold Pratt House on East 68th St. at Park Ave. on Sept. 1, 2012.

When Del Orbe leaned back to do his job, the anchors came loose, causing the worker, then 28, to fall more than 30 feet. He struck an iron fence on the way down — but his nylon webbed belt absorbed the brunt of that impact, preventing him from being impaled. Still, Del Orbe suffered fractures of the vertebrae, pelvis, rib and heel and was in a coma for three weeks, according to papers filed in Brooklyn Supreme Court.

A lawyer for the Council on Foreign Relations blamed Del Orbe for failing to check the window anchors, and also a contractor for removing the interior bolts several months earlier while installing a plexiglass cover over the window to keep out drafts. The contractor “didn’t advise the council that they have done so and in fact no one was aware that the bolt was cut until Mr. Del Orbe attached himself to it,” lawyer Lisa Fitzgerald argued in court papers.

Del Orbe was required to inspect the integrity of the window anchors he was hooking onto before washing, she said. That didn’t fly with a judge who found the council was liable, leading to the settlement reached last month.

Del Orbe’s lawyer Scott Rynecki said the window washer, a married father, can no longer work due to permanent injuries. “This settlement hopefully will send a message to building owners that they have an obligation to inspect all safety devices in their buildings so workers are properly protected,” Ryneck said. The Council on Foreign Relations, which declined to comment, is an independent think tank and publisher. Its board members include several former cabinet members, including Colin Powell and Robert Rubin.

Faby Del Orbe said the window anchors failed at the E. 68th St. building in September 2012.

Monday, 12 January 2015

Glass News



Another inch of snow possible; wind-chill -14: Today, about another inch of snow is expected along with a wind-chill factor as low as 14 degrees below zero, according to the National Weather Service's Grand Rapid station. The wind-chill represents how cold it feels outside. By day's end, the area could have a total of just under 5 inches of snow on the ground, primarily from Thursday's storm, the weather service reported. Despite the snow and single-digit temperatures James Whitaker, with Great Lakes Window Cleaning, cleans the windows at Farnum Building in downtown Lansing Friday, January 9, 2015. Whitaker said they use ethanol alcohol to keep the cleaning solution from freezing. He joked that he'll take cleaning windows in the heat of summer anyday and that he thinks about quitting every winter.

Pella (yep, the window company) enters the connected-home market (LAS VEGAS): You know the connected-home market is going mainstream when a company like Pella jumps in with both feet. The noted window- and door-manufacturer announced a whole lineup of wireless products at CES, including doors, windows, garage doors, and motorized shades with Z-Wave sensors built right into the products. This neatly solves one of the biggest aesthetic problems with the smart home: The ugly plastic boxes that bulge off the surface of your door and window frames like angry boils.
Now few of us have the budget to replace all our doors and windows just to get hidden sensors, so Pella will also offer add-on sensors that can be used with any brand of door or window. This enables a homeowner to upgrade their doors and windows one or a few at a time, but still get all the benefits of Pella’s system.
A Pella spokesperson told me an installer can also retrofit any Pella door or window manufactured since 2005 with the embedded sensors.The products will be marketed under the brand name Insynctive. In addition to the usual sensors that report if a door, window, or garage door is open or closed (a tilt sensor, in the case of a garage door), Pella also developed a deadbolt sensor that can inform you if the door is locked or unlocked. This information is relayed to a status indicator that can be stored in a wall holster or held in your hand.
Beyond sensors, Pella also introduced a new line of motorized interior window shades, and windows and French doors with motorized blinds between two panes of glass. The motors run on rechargeable batteries that are connected to miniature external solar panels. Here again, existing Pella doors and windows with built-in blinds can be retrofitted if they were manufactured in 2005 or later. Pella’s Insynctive products are controlled by a handheld remote, or they can be tied into other lighting and connected-home systems using a Z-Wave to ethernet hub. To that end, Pella announced partnerships with Wink and Nexia at the DIY level, and Crestron and Savant at the custom-installer level.

Solar chip monitors windows: A new kind of radio chip is intended to warn when windows are left open. This way, you can avoid having the heat go out the window on cold days. The sensor also detects break-in attempts early on. The key: This maintenance-free chip powers up with energy supplied by solar power.  
It happens all too often in the cold times of the year: You open the window in the morning for fresh air and forget to shut it again. A thermostat reports cold temperatures, and the heating is turned up full blast – right out the window. But open windows are a problem with more than just the heating or storms. A window tilted open, for example, is a direct invitation to intruders. It would be desirable to have an automated system that notices open windows and sends an alarm signal to the tenant. There are certainly home and building systems today that register the window status. As a rule, however, the sensors have to be attached by cable to the alarm center inside the home or building itself. In other cases, battery-operated radio sensors are used. But changing batteries in structures that have several windows can lead to a considerable maintenance expense. Researchers from the Fraunhofer Institute for Microelectronic Circuits and Systems IMS in Duisburg therefore developed a pragmatic alternative: a radio sensor chip about the size of a fingernail that is mounted directly in the window. The tiny sensor is coated with a solar cell and it supplies itself with power.
Sensors differentiate between ball and crowbar - At ten millimeters, the chip is as narrow as a pane of insulating glass is thick. It is installed on the aluminum profile between the glass that maintains the distance between the panes. Thanks to this window space, the solar cell obtains adequate light, even in the darkness of winter. Integrated in the chip are magnet and acceleration sensors that register if the window is open just a crack or all the way. The chip can send a signal via radio to the base station in the building if a window has remained open for too long. The applications of the radio chip are diverse. It can remind homeowners to ventilate regularly or warn if a window is still open when they leave the home. In addition, it offers reliable protection from intruders even for closed windows. Because the sensors can differentiate very precisely between various fluctuations - for example, a ball that slams against the pane, or an intruder’s crowbar that ratchets open the window frame. Within a tenth of a second, the system detects the disturbance and sounds the alarm if there is any doubt.

Chemical-Sensing Displays and Other Surprising Uses of Glass - An inside look at Corning’s labs suggests what’s next for the inventor of Gorilla Glass: Someday your smartphone might be able to help you in a new way when you’re traveling: by telling you whether the water is safe to drink. Although a water app isn’t close yet, researchers at Corning and elsewhere recently discovered that they could use Gorilla Glass, the toughened glass made by Corning that’s commonly used on smartphone screens, to make extremely sensitive chemical and biological sensors. It could detect, say, traces of sarin gas in the air or specific pathogens in water.
The sensors are just one project I learned about during a visit to Corning’s R&D labs in upstate New York. In the last few decades, Corning’s advances in glass-making have led to technologies such as fiber optics and flat-panel displays. Now, thanks to Gorilla Glass, it’s associated with the latest smartphones. But despite the remarkable success of that product, it is keen to catch the next high-tech boom. Corning spends about 8 percent of its sales on R&D—which will amount to about $800 million this year. It’s a hedge against the very real possibility that one of its businesses could go dark—as has happened in the past. Between 2000 and 2002, Corning lost more than half of its revenue when its fiber-optics business collapsed with much of the rest of the telecom market. Its stock plummeted from $113 to just over $1. This year, it got another scare when one of its largest customers, Apple, came close to replacing Gorilla Glass in iPhones with sapphire.
Displays, in one way or another, account for about half of Corning’s revenue, with roughly a third of that coming from Gorilla Glass. To expand this market and withstand challenges from other materials, Corning is trying to add capabilities to Gorilla Glass, such as the sensor application. And it’s looking for new markets for Gorilla Glass beyond displays.
The ability to turn your phone into a biological and chemical sensor is one of the earliest-stage projects in the lab. Researchers at Corning and Polytechnique Montreal discovered that they could make very high quality waveguides, which confine and direct light, in Gorilla Glass. The researchers were able to make these waveguides very near to the surface, which is essential for sensors. Doing so in ordinary glass would break it. Making the waveguide involves focusing a beam of intense laser light near the surface of the glass, then tracing it along the glass, which locally changes its optical properties.
To make a sensor, the researchers make a waveguide that splits into two identical pathways for light. Then the paths converge, and the light from both paths meet up. One path serves as the sensing path, and the other as a reference. Even a tiny change to the light in the sensing path—such as its intensity—can be detected by observing how the light from the two paths interacts when they meet, producing distinct patterns.
The researchers demonstrated a simple sensor that detects changes in temperature. Heating up the sensing path changes its shape, which changes the properties of the light passing through it. Because the waveguide is so close to the surface, part of the light actually extends out of the glass, and anything placed on the surface of the glass will interact with part of the light. This means that to make a chemical or biological sensor, you could prepare the surface of the glass so that a specific target will bind to it. For example, you might treat it with antibodies that latch onto E. coli. or other contaminants; detecting their presence would be as simple as putting a drop of water on the phone.
The waveguides are microscopically thin, and therefore invisible, so they wouldn’t obscure a display. And because they’re quite small, sensors for several different biological or chemical targets could be incorporated into a smartphone.
Corning researchers have also discovered that Gorilla Glass has useful acoustic properties. The way it vibrates is different than conventional glass—it damps sound waves. The simplest application is noise insulation—it blocks sound better than ordinary glass.
But the same acoustic properties could also turn displays into speakers. I saw such a prototype in one of Corning’s labs. A wire in the display attaches to a small actuator that vibrates the glass to produce sound waves. Because of the way the waves propagate through the glass, they can be more precisely controlled than with ordinary glass, allowing for higher quality sound reproduction.
In another lab, researchers showed off a seemingly ordinary window. Then, with a flip of a switch on a circuit board, it turned into a display—one showing an old Coke commercial—and I could only barely make out what was behind the image. When the ad was over, I could see through the display again. Corning was particularly secretive about how it managed to make this technology work.

Here are (clockwise from bottom) NTU professor Sun Xiaowei, research fellow Liu He, and Ph.D. student Zheng Ke with their self-tinting window.
Nanyang Technological University (NTU Singapore) scientists have developed a smart window which can darken or brighten without the need for an external power source. This unique self-tinting window requires zero electricity to operate and is also a rechargeable battery. The window's stored energy can be used for other purposes, such as to light up low-powered electronics like a light emitting diode (LED).
Currently, the window solutions in the market are either using permanent tinting which cannot brighten at night or are windows that can change its light transmission properties only with an external power source. The NTU smart window however can be turned into a cool blue tint in bright daylight, cutting light penetration by about half, and then reverts back to clear glass at night or as required. This breakthrough research led by NTU Professor Sun Xiaowei, was published recently in Nature Communications, a prestigious peer-reviewed scientific journal.
How it works - The trick to making the self-powered smart window is a new technology developed by Prof Sun's team from NTU's School of Electrical and Electronic Engineering. "Our new smart electrochromic window is bi-functional; it is also a transparent battery," Prof Sun explained. "It charges up and turns blue when there is oxygen present in the electrolyte - in other words, it breathes."
The NTU smart window contains liquid electrolyte placed in between two glass sheets coated with indium tin oxide (ITO), commonly used as transparent conductive coatings for television displays. One sheet is coated with an additional layer of a pigment known as Prussian Blue and the other one is attached to a thin strip of aluminium foil. The Prussian Blue gives the glass a blue tint when it is fully charged.
The two glass sheets are connected by typical electrical cables. When the electrical circuit between them is broken, a chemical reaction starts between Prussian Blue and the dissolved oxygen in the electrolyte, turning the glass blue. To turn off the blue tint, the electrical circuit is closed to discharge the battery, turning the Prussian Blue into a colourless Prussian White.
Such an innovative technology can adjust the amount of sunlight coming into buildings in the day, which promises significant savings on cooling and lighting costs. "Our technology is very attractive as a zero-sum consumption smart window. Buildings owners and even common households can reap energy savings right from the outset and over the long term. Developers who are looking at constructing environmentally-friendly green buildings will find our technology attractive for their building plans," said Prof Sun.
Prof Sun is an electrical engineering expert whose other innovations include various solar technologies, glass-free 3D technologies, next-generation lightings and displays. The NTU team is now enhancing their invention and is looking forward to collaborating with industry partners to commercialise their technology.

Smart window startup View is raising another $75M: A year after raising a $100 million financing round, smart window startup View (formerly called Soladigm) is raising another $75 million round, and has closed on about $29 million of the round, according to a filing with the SEC. View makes dynamic windows, also called “electrochromic windows,” which use low-voltage electrical current to reflect or absorb light, tinting or untinting the window on demand.
If it closes the round, View will have raised more than $375 million over its eight year lifetime from investors including private equity firm Madrone Capital Partners (associated with the Walton family, the heirs to the Walmart fortune), Khosla Ventures, GE, Corning, DBL Investors, and the Westly Group. Making glass, and the IT needed to tint the glass, is an expensive proposition, but View can lower its production costs as it scales up manufacturing.
View spent 2014 working on growing production at its factory in Mississippi, as well as sales, distribution and marketing. At the beginning of 2014, View was shipping glass that was 50 square feet in size, and the company had installed about 50 projects across North America including a 27,000 square foot project at a hospital in Toronto, and a 37,000 square foot project at a tech center in Louisiana.
View’s windows of course are more expensive to buy than regular windows or cheap shading options like blinds. But View’s customers (premium hotels, corporate offices, etc.) are buying them both to be early adopters of cool tech, but also to reduce energy use and energy costs associated with air conditioning and heating. The coloring effect of View’s window can cool or warm a room, and can cut 20 percent off the costs of heating and cooling, 20 percent off of lighting, and can reduce peak load (electricity at peak times of use) by 25 percent.
View’s window manufacturing process is similar to one that’s used in the semiconductor industry, but using large glass pieces. The windows are made by depositing a 1 micrometer thick layer of tungsten oxide onto a pane of glass, and then that layer is sandwiched by another pane of glass. The original core technology came out of Lawrence Berkeley National Laboratory. View also makes the controller system, and the software and apps that can control the window tint from an iPhone.

Solar panels on our cliffs! The Navitus wind farm decision is still blowing hot and cold but personally I feel that it should be a “non starter” in favour of less-obtrusive solar panels. With the local coastline predominantly south-facing, surely Navitus would be able to mount solar panels on the side of our cliffs from Hengistbury Head all along our World Heritage Jurassic Coast as far as Lulworth Cove. This would appease the turbine objectors and still generate loads of lovely loot, erm, electricity, without creating the monstrous offshore eyesore currently proposed. Whilst providing much needed jobs for local window cleaners, enterprising beach hut owners could rig up their TV and kettles and make hot showers available for surfers.


Smart windows will keep buildings cool by turning white: There’s a lot of focus at the moment on making the houses we live in and the buildings we work in more energy efficient, to the point where air conditioning isn’t necessary. There’s still a long way to go before that happens, but a newly-developed smart window should help cut energy bills if it makes it into production. You can insulate walls and the roof of a building easily, but windows are a problem area. We need them to allow light into a building, but you can’t insulate them with typical non-transparent insulation materials. There is an alternative, though, in the form of hydrogels.
Hydrogels are a mix of water and polymer that can be made to react smartly to a changing environment. Existing hydrogels don’t work that well for use in a window because they swell so much when subjected to heat. So, a new hydrogel has been created that is suspended as small beads in a liquid and then sandwiched between two sheets of glass. This new hydrogel reacts to changes in temperature. The window will be transparent below a certain temperature, but beyond that it turns white, and therefore bouncing the light and heat away from the building. In so doing, this passive system can help control the interior temperature of a building on very hot days without the need to turn on expensive AC units.
As the swelling of the hydrogel is controlled effectively, it is viable for use in new smart windows which need to work faultlessly for decades. These windows will surely carry a premium price, but the building owner will recoup the cost and then some in lower, or even non-existent AC power bills.

A rendering of the interior of the new Vikings stadium.
For Vikings stadium's bird-safe glass, 3M might have solution: The Minnesota Sports Facilities Authority is in talks with the Vikings, 3M Co. and the Audubon Society about testing possible "bird-safe window film solutions" for the team's new stadium in Minneapolis, chairwoman Michele Kelm-Helgen said Wednesday. Environmental advocates say the stadium's large walls of transparent glass will be deadly for migrating birds, which can't distinguish between actual objects and reflections. The advocates have been pushing for "fritted," or patterned, glass to deter bird collisions, and some even called for the ouster of Kelm-Helgen last month over the issue.
"We are continuing to ... explore the possibility of a study that would occur during bird migratory seasons in various locations in Minnesota," Kelm-Helgen said in a statement. "The proposed plan would be to include the stadium in the study once it is built." The authority has agreed to a lights-out policy to deter bird collisions but has rejected proposals to install fritted glass -- which was estimated to cost about $1 million -- because the glass would mar the transparent look it wants for the new facility. The new stadium will have about 190,000 square feet of glass.
Kelm-Helgen said the latest "initial conversations" regarding a solution "have been positive and productive." "We are hopeful that we will have more information to share in the near future," she said. Testing could begin in spring 2015 and continue in the fall.
Kelm-Helgen said state Sen. Scott Dibble, DFL-Minneapolis, asked the authority to meet with the Audubon Society about the potential new solution. Dibble said it's still early in the talks, but the 3M product could maintain the transparent, open feel that stadium officials want but still make the glass visible to birds. "It seems to be, if it works, the thing that would solve everyone's problem," he said.
Dibble said that if additional bird safety measures aren't forthcoming, he plans in the next legislative session to push to require the stadium authority to implement them.
Matthew Anderson, executive director of Audubon Minnesota, said it's unclear whether the new solution would be as safe for birds as fritted glass. The stadium sits in the Mississippi flyway, Anderson said, a "superhighway" for migrating birds. He said research has shown more than 980 million birds die each year in North America as a result of flying into buildings. Many details still must be worked out, Anderson said, but "we've got the right players having the right conversation." It's unclear what the 3M product is, how much it would cost, and whether the authority or the team would pay the bill. A call to 3M was not returned. A Vikings spokesman deferred comment to the authority. The glass is to be installed in early 2015. The $1 billion stadium is scheduled to open in 2016.


Who Wants a Supertall Skyline? The Emerging Aesthetic of the 1,000-Foot Tower - When you’re putting up a multi­billion-dollar tower that’s a quarter-mile high, there’s not much leeway to make it a work of art. On the other hand, when you’re putting up a multibillion-­dollar tower that’s a quarter-mile high, it had damn well better be a work of art. Dozens of supertall buildings are being built or planned, radically redrawing the skyline. If we avert our gaze, we’ll get a bundle of glass stakes fencing off the air above ­Manhattan. Skyscrapers can be better. The difficulty of making an elegant symbolic presence out of an immense vertical machine has been vexing architects for more than a century. And yet it must be done.
Too many high-gloss behemoths are so superficially designed that they betray at least part of their mandate. The coming flock glories in the upward thrust, but the earliest skyscraper designers groped toward a vertical style. They enlarged European precedents, creating piled-up palazzos encrusted with giant cornices, columns, and pediments. Sullivan’s generation divided the tower into three parts — evoking a column’s base, shaft, and capital; a tree’s roots, trunk, and branches; or a drama’s exposition, denouement, and conclusion. Sullivan saw in this the natural, and therefore sublime, expression of what a building does: high-ceilinged shops on the bottom, in the middle a warren of offices repeating as many times as necessary, topped by a windowless attic. “Form ever follows function,” he declared, a formulation slightly less terse and much less prescriptive than the modernist battle cry it inspired: Form follows function! The recent image of the two window cleaners dangling on a cockeyed plank at One World Trade dramatized the disjunction between an implacably geometric juggernaut and the messy frailty of individual lives. The architectural challenge of supertall buildings is to accommodate humans in structures of inhuman scale.
Because today’s economics permit a tiny number of largely absent owners to have a disproportionate impact on the skyline, these buildings invert the rationale that propelled skyscraper construction for more than a century. Instead of packing the largest number of people onto the smallest patch of earth, they fill up the skyline with vacant acres of glassed-in parquet. These are mostly generic products masquerading as luxury goods: stratospheric views, ceilings high enough to echo, and features like on-site pet spas. This bounty of comforts is usually wrapped in floor-to-ceiling glass, which facilitates the imperial gaze — or pretends to. Actually, the glass wall maligns traditional windows, which provide both openings and shelter. You can’t appreciate a vista with your shins, or see much through the glass above your head. The layouts of these crystalline crows’ nests afford nowhere to retreat from contact with the sky. They offer the thrill of simulated exposure. No wonder the owners maintain a selection of cozier homes.
It’s not enough just to gawp at these towers’ bravado or grumble at the arrogance of the hyperrich gobbling up the sky. Like it or not, the elongated condo is an ever more assertive category of New York architecture, and it too can function as a form of public art. The combination of slenderness and height means that skyscrapers can sprout from modest lots, minimizing their impact on the street and narrowing the shadows they cast. The fact that they contain the caviar of real estate means that they can afford the luxury of being good. We have to live with the follies of the outlandishly wealthy; we can at least insist that they pamper themselves in a way that also enriches the city.

Search This Blog