Showing posts with label windows 101. Show all posts
Showing posts with label windows 101. Show all posts

Tuesday, 16 February 2010

Window Cleaning Videos

A few more window cleaning videos. More tomorrow...
A ladder-stay for windy days: Wagga says "Just fit a clip like this and you can work a bit more confidently in the wind."


How Seth Fensterstock (recent Master Window Cleaner of the Year) changes the rubber ladder feet on his sectional ladder.


Windows 101 revives an old clip from the '80's of some high-rise action..


Must see footage of Skyscraperman aka "SpiderDan Goodwin", scaling the World Trade Center in 1983. His goal was to scale both towers in a single day but his plans were dashed when the window washing tracks nearly ripped away.


This is a feature story on a man who washes businesses' windows in downtown Bakersfield, all while riding his bicycle.


Galloway's Window Cleaning Services in Swansea, South Wales using a water fed pole.


Dr Squeegee from Canada...


Tool-talk with Mark Strange, author of the "Window Cleaning Skills" DVD. Here he is in explaining in his easy to understand style, Unger Monsoon covers & sea sponges.



Oh dear....Vicki Lewis demonstrates how her Bring-It-On Water Spot remover and new Super Squeegee team up to make short work of cleaning water-stained and mineral-stained windows and glass.

Saturday, 13 February 2010

Glass 101



Glass has a sandy origin: By Marshall Brain

When you look out the window to see the outside world, you are looking through glass. It could be a single sheet of glass, two or three sheets (in double- and triple-pane windows), laminated glass in a car windshield, tempered glass or thick bulletproof glass. But they all start with the same common substance -- sand.

Glass is basically liquefied sand that has re-solidified in a way that is transparent. Glass does, occasionally, form in nature. For example, if a bolt of lightning strikes the top of a large sand dune, the intense heat of the electricity as it passes through will melt the sand and form a fulgurite (pictured below). People dig the ragged rods out of the dune and collect them as novelties.



A far more common way to create glass is in a factory that is making something like plate glass, glass bottles or light bulbs. The raw ingredients of industrial glass are quartz sand, soda ash (also known as sodium carbonate), lime (also known as calcium oxide) and additives like magnesium and aluminum. The soda ash cuts the melting temperature of the sand in half, meaning it is much less expensive to make glass.

These ingredients, along with crushed recycled glass, go into a furnace for melting. The recycled glass makes it even easier to melt the glass, and lowers the cost again. The melting temperature is still amazing, approaching 3,000 degrees Fahrenheit. Getting everything melted and mixed can take a day and is done in a brick-lined chamber that runs continuously, sometimes for years, until the bricks wear down and have to be replaced.

Once the glass comes out, it can go into moulds to be blown into bottles, or it can be floated on molten tin to create flat window glass. To make long, straight fluorescent tubes, it comes out of a bottom of the furnace in the tube shape, curves to horizontal and then cools over a long run of factory floor.

Most glass that goes into windows, bottles and bulbs is annealed glass. It is cooled slowly to keep it from shattering and then put to use. The problem with annealed glass is that it forms large, sharp shards that look and act like knife blades when it breaks. Much safer is tempered glass, which shatters into relatively harmless tiny bits. Glass is tempered either by heating and rapid cooling, or with chemicals. Tempered glass is used in everything from sliding glass doors to car windows, because it is much stronger and safer than annealed glass.

A car's windshield, however, is a special case. It wouldn't really be helpful to have a windshield shatter into tiny bits and fly into the driver's face if a rock hit it. So a windshield is actually made of two sheets of glass with a thick layer of plastic in between. Even if a bowling ball were to hit the windshield, chances are that the plastic layer is strong enough to catch it and keep it out of the car. Most of the broken glass inside the car will stick to the plastic as well, keeping it away from passengers.

Bulletproof glass is a lot like a windshield. But the inner plastic layer is much thicker and stronger. Made of a durable plastic like Lexan, the glass layers keep the plastic from scratching while the plastic layer stops the bullets from penetrating. Or multiple layers of glass-plastic sandwich can do the same kind of thing. A bulletproof window can be anywhere from two to five inches thick.

Then there is tinting. If you have ever looked edge-on at a glass tabletop, you have probably noticed that the glass is green. If you had a glass window two feet thick, that green colour would be obvious. But most glass is so thin that you don't even notice the colour. The green tint comes from a small amount of iron or iron oxide in the original sand. You can take the tint in two different directions. If you remove the iron, you get a glass tabletop that is clear when you look at the edge. The glass has no tint. Or in a car, you may want tinted glass to keep the sun out. Adding iron will increase the tint.

The very best feature of glass in this day and age is its ability to be recycled. Glass can be melted down over and over again without any degradation. Or, if it is left in the environment, glass is eventually broken, crushed and turned back into sand.

Friday, 12 June 2009

New Window Cleaner Brightens Bridlington



Simon Gregson makes Bridlington a brighter place: Actions speak louder than words, in the eyes of window cleaner Simon Gregson. Pictured: Simon Gregson putting a shine on the windows of the empty Betta Sports shop in King Street. While getting business cards printed for his new venture, Yorkshire Coast Window Cleaning, he got into a discussion about empty shops. But he decided he could do something to make the town look a little better, got a list of derelict places in need of a clean and set to work – all for free. He said: "They might not be perfect but they look 10 times tidier than they did, just by having the windows cleaned. "It is putting something back because we have lived here a long time, although this is a reasonably new venture. "Plus it is a good chance to practice. "I am a one-man operation. I lost my job in IT at the end of January but it has taken quite a while to get all the gear together."
Over three days, Simon cleaned around 15 derelict properties in the town centre and Old Town. And he said he hoped other people would follow his lead, urging people to take more pride in Bridlington. Simon, of Seventh Avenue, said: "There is a lot of whinging and moaning, but people are better getting off their backsides and doing something. "It's better to be pro-active, even if it just makes a small difference. "If I owned a shop I would clean the shop next door. It could make no end of good for their own business."
Printing his business cards was Martyn Coltman of Burlington Design, who is chairman of Bridlington's Renaissance Partnership. He said: "I really admire someone who is prepared to put time in completely free to help improve the town centre and I hope it inspires other business people to do something themselves. "It is everyone's responsibility to try and regenerate Bridlington. It is the fact that someone cares." Simon can be reached on freephone 0800 411 8711.


Thursday, 23 October 2008

R.I.P. Norm Winton

From Ted Winton: I just wanted to let the group know that my dad, Norm Winton, passed away on September 22nd. He suffered a stroke on September 3rd, and never made it out of the hospital. I'm not sure how many of you knew him that well, but I saw he had been posting here fairly often.For those interested, here is a link to the slideshow that my brother and I put together for his memorial service.

In loving memory of Norman L. Winton. Born November 8, 1936 in Hewitt, Minnesota. Died September 22, 2008 in Clackamas, Oregon. Memorial service will be held on September 26, 2008 in Portland, Oregon.

Norm was most prolific as a moderator on the windows 101 forum, sharing his insight into the window cleaning world. He came across on the internet as a very funny & giving guy. I always enjoyed the stories he dug up & his fascination with sea sponges! Thanks Norm for your servive to the window cleaning industry.

Search This Blog